Adaptec AHA-2940 Installation Guide - Page 4

2940UWPro-ig.qxd 12/21/98 9:55 AM Page 4 STEP 4 CAUTION Do not connect SCSI devices to all three connectors of a SCSI Card 2940UW Pro host adapter. Connect one end of the internal SCSI cable to the SCSI Card 2940UW Pro's internal SCSI connector. Each cable included in this package allows you to connect up to two internal SCSI devices. To connect more than two internal SCSI devices to each internal connector on the SCSI Card 2940UW Pro, you will need an internal SCSI cable with enough connectors to accommodate all of your devices. See the SCSI Card 2940UW Pro User's Reference for additional information on connecting your SCSI devices and ordering cables. STEP 5 High-density 68-pin Internal SCSI Cable Standard 50-pin Internal SCSI Cable Internal 50-pin SCSI Connector (Use with Standard and Ultra SCSI Devices) Internal 68-pin SCSI Connector (Use with Wide and Ultra Wide SCSI Devices) Connect the other end of the cable to the last internal device (this device must be terminated; see Step 2 above). Terminated Internal SCSI Device Internal SCSI Cable STEP 6 Connect the remaining connectors on the cable to any remaining internal devices (these devices must not be terminated; see Step 2 above). Terminated Internal SCSI Device Unterminated Internal SCSI Device 4