Adaptec AHA-2940 Installation Guide - Page 10

2940UWPro-ig.qxd 12/21/98 9:55 AM Page 10 Computers with DOS 6.x or Above STEP 1 Turn on all external devices and then the computer. STEP 2 Insert the Adaptec EZ-SCSI Setup Disk in your floppy disk drive. STEP 3 At the DOS prompt, type a:\dosinst if you are using the A drive, or b:\dosinst if you are using the B drive. Then press Enter. STEP 4 Follow the instructions that appear onscreen. Computers with NetWare, OS/2, SCO UNIX, and UnixWare The Adaptec 7800 Family Manager Set included in this package allows you to install or update existing drivers for NetWare, OS/2, SCO UNIX, and UnixWare. Refer to the 7800 Family Manager Set User's Guide for installation instructions. CONGRATULATIONS! You've finished installing SCSI Card 2940UW Pro. Troubleshooting hints are in the next section. For additional troubleshooting hints and information on using and configuring the SCSI Card 2940UW Pro and SCSI devices, see the SCSI Card 2940UW Pro User's Reference. 10