Adaptec 1430SA User Guide - Page 59
Formatting and Verifying Disk Drives, Ctrl+A, Disk Utilities, Enter, Format Disk, Verify Disk Media
UPC - 760884154328
View all Adaptec 1430SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Appendix B: Using the ARC Utility ● 59 Formatting and Verifying Disk Drives You can use the disk utilities to low-level format or verify your disk drives. (New disk drives are low-level formatted at the factory and do not need to be low-level formatted again.) ! Caution: Before you format a disk drive, back up all data. Formatting destroys all data on a disk drive. To use the disk utilities: 1 Turn on your computer and press Ctrl+A when prompted to access the ARC utility. 2 From the ARC utility menu, select Disk Utilities. 3 Select the desired disk, then press Enter. You are offered the following options: ● Format Disk-Simulates a low-level format of the disk drive by writing zeros to the entire disk. SATA drives are low-level formatted at the factory and do not need to be low-level formatted again. ! Caution: Formatting destroys all data on the disk. Be sure to back up your data before performing this operation. ● Verify Disk Media-Scans the media of a disk drive for defects.