Adaptec 1430SA User Guide - Page 57
ATAPI Support, Using SATASelect
UPC - 760884154328
View all Adaptec 1430SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Appendix B: Using the ARC Utility ● 57 4 Press Enter. 5 Read the warning message and ensure that you have selected the correct disk drives to configure. Type Y to continue. ATAPI Support The following devices are supported: ● The 1220SA supports detection of SATA ATAPI TAPE Drive and CDROM. ● The 1220SA supports booting from the ELTORITO bootable CD/DVD media. If a bootable CD/DVD media is detected, that bootable media gets precedence in the booting order. Using SATASelect The SATASelect utility allows you to change the BIOS and HostRAID controller and device settings without opening the computer cabinet. For information on the SATASelect options, see SATASelect Options on page 58. To access SATASelect: 1 Restart the computer, then press Ctrl+A when prompted to access the ARC utility. 2 If multiple HostRAID controllers are installed, select the HostRAID controller you want to configure, then press Enter. 3 From the ARC menu, select SATASelect Utility. 4 To select a menu option, browse with the arrow keys to the option, then press Enter. In some cases, selecting an option displays another menu. You can return to the previous menu at any time by pressing Esc. 5 To restore the original SATAlSelect default values, press F6 from within the SATA Driver and Controller Configuration screens. 6 To exit SATASelect, press Esc until a message prompts you to exit (if you changed any settings, you are prompted to save the changes before you exit). 7 At the prompt, select Yes to exit, then press any key to restart the computer. Any changes you made in SATAlSelect take effect after the computer restarts.