Acer Altos R920 User Manual - Page 79
Store the card in an antistatic protective wrapper.
View all Acer Altos R920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
61 Note: Press the attention button again within five seconds to abort the hot-plug operation. 3 Make sure that the power LED on the rear of the PCI slot is turned off before disconnecting any cables attached to the card. 4 Open the yellow caution plate (A). 5 Rotate the slot retention latch on the rear of the card slot upward (B). 6 Release the vertical edge of the card and pull it away from the chassis (C). B PCI Add-in Card C APCI Caution Plate 7 Store the card in an antistatic protective wrapper. 8 If installing a new PCI card, see "To install a new PCI hot-plug PCI card" section. 9 Observe the post-installation instructions described on page 40.
61
Note:
Press the attention button again within five seconds to
abort the hot-plug operation.
3
Make sure that the power LED on the rear of the PCI slot is turned
off before disconnecting any cables attached to the card.
4
Open the yellow caution plate
(A)
.
5
Rotate the slot retention latch on the rear of the card slot upward
(B)
.
6
Release the vertical edge of the card and pull it away from the
chassis
(C)
.
7
Store the card in an antistatic protective wrapper.
8
If installing a new PCI card, see “To install a new PCI hot-plug PCI
card” section.
9
Observe the post-installation instructions described on page 40.
PCI Caution Plate
A
B
C
PCI Add-in Card