Acer Altos R920 User Manual - Page 104
Installing and removing the ARMC/3 R2 module, To install the ARMC/3 R2 module
View all Acer Altos R920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
86 3 System upgrade Installing and removing the ARMC/3 R2 module The optional ARMC/3 R2 module provides server management firmware and functionality for the system. To install the ARMC/3 R2 module: 1 Perform the pre-installation instructions described on page 39. 2 Remove the I/O expansion module. Perform instructions described in "To remove the I/O expansion module" section on page 85. 3 Set the I/O expansion module on a static controlled surface with components facing up. 4 Record the MAC address on the ARMC/3 R2 module. 5 Peel off the backing from the EMI gasket (A). 6 Adhere the gasket to the I/O expansion module where the ARMC/3 R2 NIC module will contact the I/O expansion module (B). B Network I/O Expansion Module A AF002284
3 System upgrade
86
Installing and removing the ARMC/3 R2 module
The optional ARMC/3 R2 module provides server management
firmware and functionality for the system.
To install the ARMC/3 R2 module:
1
Perform the pre-installation instructions described on page 39.
2
Remove the I/O expansion module. Perform instructions described
in “To remove the I/O expansion module” section on page 85.
3
Set the I/O expansion module on a static controlled surface with
components facing up.
4
Record the MAC address on the ARMC/3 R2 module.
5
Peel off the backing from the EMI gasket
(A)
.
6
Adhere the gasket to the I/O expansion module where the ARMC/3
R2 NIC module will contact the I/O expansion module
(B)
.
Network I/O Expansion Module
A
B
AF002284