Acer ARMC_3P User Manual - Page 64

Resets the given target, the host system or the ARMC/3P card. If no reset

Get Acer ARMC_3P PDF manuals and user guides View all Acer ARMC_3P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

52 PRODUCT USER GUIDE vated (if the serial settings were made accordingly). All inputs are redirected to the device on serial port #1 and its answers are displayed on the Telnet interface. Figure 48 Telnet Console The following list shows the command syntax and their usage. help Displays the list of possible commands quit Exits the current session and disconnects from the client version Displays the release information terminal Starts the terminal pass-through mode for serial port #1. The key sequence esc exit switches back to the command mode. The command has an optional parameter (1 or 2) to select the desired serial port for pass-through access. reset [host|card] Resets the given target, the host system or the ARMC/3P card. If no reset target is given it defaults to "host". Note that resetting the ARMC/3P results in disconnecting every client. This includes also the client the reset command was sent from. power [on|off [short|long]] The host is powered on or off. If no new power state is given, the current

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
52
P
RODUCT
U
SER
G
UIDE
vated (if the serial settings were made accordingly). All inputs are redirected to the
device on serial port #1 and its answers are displayed on the Telnet interface.
Figure 48 Telnet Console
The following list shows the command syntax and their usage.
help
Displays the list of possible commands
quit
Exits the current session and disconnects from the client
version
Displays the release information
terminal
Starts the terminal pass-through mode for serial port #1. The key sequence
esc exit switches back to the command mode. The command has an optional
parameter (1 or 2) to select the desired serial port for pass-through access.
reset [host|card]
Resets the given target, the host system or the ARMC/3P card. If no reset
target is given it defaults to “host”. Note that resetting the ARMC/3P results in
disconnecting every client. This includes also the client the reset command
was sent from.
power [on|off [short|long]]
The host is powered on or off. If no new power state is given, the current