2012 Yamaha Motorsports Royal Star Venture S Owners Manual - Page 87

2012 Yamaha Motorsports Royal Star Venture S Manual

Page 87 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT 7. Install the air filter element by fitting the projection on the air filter element into the holder in the air filter case, then tightening the screws. NOTICE: Make sure that the air filter element is properly seated in the air filter case. The engine should never be operated without the air filter element installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. [ECA10481] 1. Air filter element 2. Screw 1. Carburetor air vent hose 6. Lightly tap the air filter element to remove most of the dust and dirt, and then blow the remaining dirt out with compressed air as shown. If the air filter element is damaged, replace it. 8. Install the air filter case cover by installing the screws. 9. Push the air filter case onto the air filter case joint, and then tighten the clamp screw. 10. Install the air filter case bolts. 11. Install the cowlings. 12. Route the carburetor air vent hose as shown. 8 1. Air filter element 8-20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

PERIODIC MAINTENANCE AND ADJUSTMENT
8-20
8
6.
Lightly tap the air filter element to
remove most of the dust and dirt,
and then blow the remaining dirt
out with compressed air as shown.
If the air filter element is damaged,
replace it.
7. Install the air filter element by fit-
ting the projection on the air filter
element into the holder in the air fil-
ter case, then tightening the
screws.
NOTICE:
Make sure that
the air filter element is properly
seated in the air filter case. The
engine should never be operat-
ed without the air filter element
installed, otherwise the pis-
ton(s) and/or cylinder(s) may
become
excessively
worn.
[ECA10481]
8.
Install the air filter case cover by in-
stalling the screws.
9.
Push the air filter case onto the air
filter case joint, and then tighten
the clamp screw.
10.
Install the air filter case bolts.
11.
Install the cowlings.
12.
Route the carburetor air vent hose
as shown.
1.
Air filter element
2. Screw
1.
Air filter element
1.
Carburetor air vent hose