2012 Yamaha Motorsports Royal Star Venture S Owners Manual - Page 107
2012 Yamaha Motorsports Royal Star Venture S Manual
Page 107 highlights
MOTORCYCLE CARE AND STORAGE EAU37833 EAU26123 Matte color caution ECA15192 Cleaning Frequent, thorough cleaning of your motorcycle not only enhances its appearance, but also improves its performance and extends its life. ECA10732 NOTICE Some models are equipped with matte colored finished parts. Be sure to consult a Yamaha dealer for advice on what products to use before cleaning the vehicle. Using a brush, harsh chemical products or cleaning compounds when cleaning these parts will scratch or damage their surface. Wax also should not be applied to any matte colored finished parts. contact with strong or abrasive cleaning products, solvent or thinner, fuel (gasoline), rust removers or inhibitors, brake fluid, antifreeze or electrolyte. Before cleaning the motorcycle 1. Cover the muffler outlets, to prevent water entry, with plastic bags and strong rubber bands. 2. Make sure that the spark plugs and all caps and covers are properly installed. 3. Apply Yamaha Mud and Grease Release or another high-quality degreaser to the crankcase, to remove any excessive grease, with a paintbrush. Do not apply degreaser to the wheel axles. Cleaning the motorcycle ECA10940 NOTICE ● ● Improper cleaning can damage plastic parts (such as cowlings, panels, windshields, headlight lenses, meter lenses, etc.) and the mufflers. Use only a soft, clean cloth or sponge with water to clean plastic. However, if the plastic parts cannot be thoroughly cleaned with water, diluted mild detergent with water may be used. Be sure to rinse off any detergent residue using plenty of water, as it is harmful to plastic parts. If the windshield is scratched, use a quality plastic polishing compound after washing. Do not use any harsh chemical products on plastic parts. Make sure to avoid using cloths or sponges which have been in 9-1 NOTICE ● 9 Do not use high-pressure washers, since excessive high pressure may cause water seepage and deterioration of wheel bearings, the front fork, brakes,