2012 Yamaha Motorsports Grizzly 300 Automatic Owners Manual - Page 95
2012 Yamaha Motorsports Grizzly 300 Automatic Manual
Page 95 highlights
13. Install the radiator cap, start the engine, let it idle for several minutes, and then turn it off. 14. Remove the radiator cap to check the coolant level in the radiator. If it is low, add sufficient coolant until it reaches the top of the radiator, and then install the radiator cap. 15. Start the engine, and then check for coolant leakage. TIP If any leakage is found, have a Yamaha dealer check the cooling system. 16. Install the front panel and the front carrier. Cleaning the air filter element The air filter element should be cleaned at the intervals specified in the periodic maintenance and lubrication chart. Clean or, if necessary, replace the air filter element more frequently if you are riding in unusually wet or dusty areas. TIP There is a check hose at the bottom of the air filter case. If dust or water collects in this hose, empty the hose and clean the air filter element and air filter case. 8 1 1. Air filter case check hose 8-23