2012 Yamaha Motorsports Grizzly 300 Automatic Owners Manual - Page 90
2012 Yamaha Motorsports Grizzly 300 Automatic Manual
Page 90 highlights
4. Install the drain bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil drain bolt: 30 Nm (3.0 m·kgf, 21.7 ft·lbf) 5. Add the specified amount of the recommended final gear oil, and then check the oil level. Recommended final gear oil: See page 10-1. Oil quantity: 0.15 L (0.16 US qt, 0.13 Imp.qt) 8 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. To check the coolant level 1. Place the ATV on a level surface. TIP The coolant level must be checked on a cold engine since the level varies with engine temperature. 2. Check the coolant level in the coolant reservoir. TIP The coolant should be between the minimum and maximum level marks. NOTICE Be sure no foreign material enters the final gear case. 6. Install and tighten the final gear oil filler bolt. Tightening torque: Final gear filling bolt: 15 Nm (1.5 m·kgf, 10.8 ft ·lbf) 7. Check the final gear case for oil leakage. If oil is leaking, check for the cause. 8-18