2012 Yamaha Motorsports Grizzly 300 Automatic Owners Manual - Page 119
2012 Yamaha Motorsports Grizzly 300 Automatic Manual
Page 119 highlights
Adjusting a headlight beam NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, loosen the headlight beam adjusting screw, slide the adjusting screw in direction (a), and tighten the adjusting screw. To lower a headlight beam, loosen the headlight beam adjusting screw, slide the adjusting screw in direction (b), and tighten the adjusting screw. Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Remove the tail/brake light assembly by removing the nuts together with the washers. 2 1 8 1 (a) (b) 1. Tail/brake light assembly 2. Nut 1. Headlight beam adjusting screw 8-47
8-47
1.
Tail/brake light assembly
2. Nut
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the tail/brake light assembly by re-
moving the nuts together with the washers.
1
2
1.
Headlight beam adjusting screw
Adjusting a headlight beam
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
1
(a)
8
To raise a headlight beam, loosen the headlight
beam adjusting screw, slide the adjusting screw
in direction (a), and tighten the adjusting screw.
To lower a headlight beam, loosen the headlight
beam adjusting screw, slide the adjusting screw
in direction (b), and tighten the adjusting screw.
(b)