2012 Yamaha Motorsports Grizzly 300 Automatic Owners Manual - Page 86
2012 Yamaha Motorsports Grizzly 300 Automatic Manual
Page 86 highlights
6. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 15 Nm (1.5 m·kgf, 10.8 ft ·lbf) 7. Refill with the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. Recommended oil: See page 10-1. Oil quantity: 1.20 L (1.27 US qt, 1.06 Imp.qt) 8 TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. 8. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 9. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary. 10. Place the engine oil cap cover in its original position, and push inward to secure it. 1 1. Engine oil cap cover 8-14