2011 Yamaha Motorsports RS Venture GT Owners Manual

2011 Yamaha Motorsports RS Venture GT Manual

2011 Yamaha Motorsports RS Venture GT manual content summary:

  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 1
    OWNER'S MANUAL Read this manual carefully before operating this vehicle. RS90GTA RS90LTGTA RST90A RST90GTA LIT-12628-02-95 8JA-28199-11
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 2
    ESU10041 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 3
    sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this snowmobile. If you have any questions concerning the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 4
    information ESU10151 Particularly important information is distinguished in this manual by the following notations. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 5
    Contents Location of the important labels ...1 Safety information ...6 Description ...8 Control functions ...11 Main switch ...11 Starter (choke) lever (RST90) ...11 Throttle lever ...11 Throttle override system (T.O.R.S.) ...12 Multi-function meter unit ...13 High beam indicator light ...16 Low
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 6
    a headlight bulb ...103 Adjusting the headlight beams ...107 Fittings and fasteners ...108 Battery ...108 Replacing a fuse ...109 Troubleshooting ...116 Storage ...120 Specifications ...122 Consumer information...125 Identification number records ...125 Vehicle Emission Control Information label
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 7
    Location of the important labels ESU10216 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 8
    Location of the important labels RS90GT / RS90LTGT 13 10 11 12 17 17 RST90 14 15 11 12 16 RST90GT 10 17 17 14 10 15 11 12 16 2 17 17
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 9
    loss if crankcase breather hoses are not installed correctly. Inspect hoses and clamps for correct installation after battery service or air box removal. See Service Manual. ATTENTION Des dommages graves risquent de survenir par suite de fuites d'huile résultant d'un mauvais branchement des tuyaux
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 10
    ~ 0.98 in)/100 N (10 kg, 22 lb) * FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL. * SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 9 RST90 SPECIFICATIONS DE LA Manual. FILS DE BRANCHEMENT DES CÂBLES DE DÉMARRAGE • Effectuer le branchement des câbles de démarrage conformément aux instructions
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 11
    Location of the important labels 13 RS90LTGT 14 RST90 / RST90GT LOAD LIMIT / CHARGE LIMITE 10kg {22lbs} 8ET-24897-00 15 RST90 / RST90GT LOAD LIMIT / CHARGE LIMITE 20kg {44lbs} 8FM-24897-01 16 RST90 / RST90GT MAX. TOWING FORCE MAX. VERTICAL FORCE FORCE DE REMORQUAGE MAX. FORCE VERTICALE MAX. 1176
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 12
    are prohibited. Carrying a passenger can cause loss of control. While using your snowmobile G Before you operate your snowmobile G G Read the Owner's Manual and all labels. Become familiar with all of the operating controls and their function. Consult a Yamaha dealer about any control or
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 13
    Safety information G Many surfaces such as ice and hardpacked snow require much longer stopping distances. Be alert, plan ahead and begin decelerating early. The best braking method on most surfaces is to release the throttle and apply the brake gently-not suddenly. Avoid carbon monoxide poisoning
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 14
    Description ESU10261 RS90GT 1,2,3 4 5,6,7 8,9 10 14 13 12 11 RS90LTGT 1,2,3 4 5,6,7 8,9 10 14 1. Battery 2. Main fuse 3. Air filter 4. Oil filler cap 5. Fuse box 6. Coolant reservoir 7. Coolant recovery tank 8. Storage compartment 9. Tool kit 10. Tail/brake light 11. Slide rail suspension 12.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 15
    Description RST90 10,12 1,2,3,4 20 5,6 7 8 9 19 13 14 17 RST90GT 1,2,3 16 15 18 4 5,6 7 8 9 10,11,12 13 14 17 16 15 1. Battery 2. Main fuse 3. Air filter 4. Oil filler cap 5. Fuse box 6. Coolant reservoir 7. Passenger grip warmer switch 8. Passenger grip 9. Backrest 10. Storage
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 16
    heater jack (RS90GT / RS90LTGT / RST90GT) 7. Engine stop switch TIP G G The snowmobile you have purchased may differ slightly from those shown in the figures of this manual. Design and specifications are subjected to change without notice. 10
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 17
    Control functions ESU13740 Main switch The main switch controls the ignition and lighting systems. The various positions are described below. 1 2 3 1. Starter (choke) lever TIP Refer to the "Starting the engine" section on page 48 for proper operation. 1. Off 2. On 3. Start Off The ignition
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 18
    ESU13750 TIP If the T.O.R.S. is activated, the warning light and engine trouble warning indicator flash, and the two-digit code "84" displays ( has been corrected and that the engine can be operated without a problem before restarting the engine. Continuing to operate with a malfunction could cause
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 19
    warning light, and all segments of the meter unit display come on and go off. 12 3 FHI 4 5 6 7 8 9 E LO 1. Warning light " " 2. Engine trouble warning indicator " 3. Two-digit code "84" ESU14100 " Multi-function meter unit RS90GT / RS90LTGT / RST90GT The multi-function meter unit is equipped
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 20
    it by pushing the "SELECT" button, and then push the "RESET" button for at least 1 second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after the snowmobile has been refueled and traveled 5 km (3 mi). TIP
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 21
    Control functions If the engine oil is changed before the oil change tripmeter appears in the display (i.e., before the periodic oil change interval has been reached), the tripmeter must be reset after the oil change for the next periodic oil change to be indicated at the correct time. In that case,
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 22
    an odometer G a tripmeter (which shows the distance traveled since it was last set to zero) G warning indicators (which show engine trouble, coolant temperature, fuel level, and oil level warnings) G indicator lights (which show high beam and low coolant temperature conditions) G a warning
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 23
    snowmobile at low speeds when the low coolant temperature indicator light is on. If the engine speed is too high, the warning light and engine trouble warning indicator flash and the two-digit code "86" flashes in the error code display. When this occurs, maximum engine speed is reduced to protect
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 24
    Control functions ESU14040 Fuel meter and grip/thumb warmer level indicator RS90GT / RS90LTGT / RST90GT The fuel meter and grip/thumb warmer level indicator have eight segments which show the amount of fuel remaining in the fuel tank, the grip warmer level, or the thumb warmer level. TIP The
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 25
    Control functions TIP G G The grip/thumb warmer level is displayed for 5 seconds after releasing the grip/thumb warmer adjusting switch, then the display switches to the fuel meter. When the engine is started, the grip/thumb warmer levels are set to the levels selected when the engine was last
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 26
    , or short circuit is detected by the self-diagnosis device of the snowmobile to warn the rider of any of the above problems. If this occurs, have a Yamaha dealer inspect the snowmobile as soon as possible. RS90GT / RS90LTGT / RST90GT 1 1. Grip warmer adjusting switch 3 4 1 2 1. Thumb warmer
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 27
    Control functions RST90 If the oil level warning indicator and the warning light come on, place the snowmobile on a level surface and allow it to idle for one minute. If the oil level warning indicator and the warning light go off, the engine oil level is sufficient, however it is getting low. Add
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 28
    diagnosis device This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the warning light and the engine trouble warning indicator flash, and an error code displays (RS90GT / RS90LTGT / RST90GT) or flashes slowly (RST90
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 29
    Control functions 1 1. Engine stop switch " " 1. Grip/thumb warmer adjusting switch During the first few rides, practice using the stop switch so that you can react quickly in an emergency. ESU10661 To raise the temperature To raise the grip warmer temperature, press the " " side of the switch.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 30
    Control functions RS90GT / RS90LTGT / RST90GT 1 1. Thumb warmer adjusting switch 2 1. Auxiliary DC jack cap 2. Auxiliary DC jack To raise the temperature To raise the temperature, press the respective switch to "HI". RST90 To lower the temperature To lower the temperature, press the respective
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 31
    end does not project out over the handlebar end. This will help prevent brake lever damage when the snowmobile is placed on its side for service. 1. Helmet shield heater jack cap 2. Helmet shield heater jack 3. After using the helmet shield heater, be sure to remove its power plug from the jack
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 32
    Control functions ESU10593 Shift lever The shift lever is used to put the snowmobile into forward or reverse. After coming to a complete stop, pull the shift lever out, slide it to "FWD" or to "REV" until it stops, and then release it. RS90GT / RS90LTGT / RST90GT 1. Locknut 2. Adjusting bolt 3.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 33
    Control functions 3 2 1 1. Pull out. 2. Slide to "REV" (reverse). 3. Release. ECS00072 1. Pull out. 2. Slide to "REV" (reverse). 3. Release. RST90 NOTICE Do not use the shift lever while the snowmobile is moving, otherwise the drive train could be damaged. ESU14092 Drive guard EWS00402 WARNING
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 34
    Control functions The drive guard is designed to protect the Vbelt clutch and V-belt in case parts break or come loose. The drive guard is located behind the left side cover (RS90GT / RS90LTGT / RST90GT), or under the shroud (RST90). [See page 63 (RS90GT / RS90LTGT / RST90GT) or page 67 (RST90) for
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 35
    Control functions RS90GT / RS90LTGT / RST90GT 1 2 1 1. V-belt holder 1. Passenger grip 2. Passenger grip adjusting knob RST90 To change the passenger grip position 1. 2. 3. Remove the passenger grip adjusting knob by turning it counterclockwise. Move the passenger grip to the desired position.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 36
    Control functions RST90 1 2 1. 2. 3. 4. Passenger grip warmer switch Off "HI" (high) "LO" (low) 1. Footrest 2. Screw ECS00131 NOTICE G RST90GT 1 G Make sure that the screws are tightened securely after changing the position of the footrests. Do not overtighten the screws, otherwise the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 37
    / RS90LTGT / RST90GT) RS90GT / RS90LTGT The storage compartment is located behind the seat. Use the storage compartment to store the tool kit, manuals, spare parts, or other small items. 1. Backrest 2. Backrest adjusting knob To open the storage compartment Turn the fastener 1/2 turn in either
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 38
    hook the storage compartment latches. Storage pouch The storage pouch is located inside the storage compartment. Use the storage pouch to store the tool kit, manuals, spare parts, or other small items. 2 1 1 1. Storage compartment latch 2. Storage compartment lid 1. Storage pouch 32
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 39
    Control functions ECS00781 NOTICE Before starting the engine, make sure that the tool kit is securely fastened and that the storage pouch zipper is completely closed. ESU10823 Storage areas (RST90) This snowmobile is equipped with a storage compartment, rear storage area, and rear carrier. 1. Rear
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 40
    Control functions 3 4 1 1 2 1. Backrest 2. Rear carrier 3 1. 2. 3. 4. Hole Rear carrier Bolt Carrier lock bracket 3. Remove the passenger seat lock knob, and then remove the passenger seat. 5. 6. 1. Passenger seat 2. Passenger seat lock knob Slide the rear carrier backward until it stops.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 41
    Control functions 3. Align the holes in the backrest bracket with the bolts on the carrier lock bracket, and then place the backrest on the carrier lock bracket. 1. Carrier lock lever ESU10862 Tow hitch bracket (RST90 / RST90GT) 1. Hole ECS00241 NOTICE To prevent premature wear of the V-belt,
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 42
    WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. Make sure there is sufficient gasoline in the tank. 1. Before refueling, turn off the engine and be sure that nobody is on the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 43
    damping performance. G Do not dispose of a damaged or worn out shock absorber yourself. Take the shock absorber to a Yamaha dealer for any service. NOTICE G G G G Oxygenated fuels (gasohol) containing a maximum 10% of ethanol (E10) can be used, although richer jetting may be required to prevent
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 44
    Control functions 2. To increase the spring preload and thereby harden the suspension, turn the adjusting nut in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting nut in direction (b). RS90GT / RS90LTGT / RST90GT Spring preload setting*: Minimum (
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 45
    Control functions To increase the compression damping force, turn the adjusting knob in direction (a). To decrease the compression damping force, turn the adjusting knob in direction (b). 1. Rebound damping force adjusting knob 1. Compression damping force adjusting knob Compression damping
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 46
    Control functions the spring preload and thereby soften the suspension, turn the adjusting nut in direction (b). Tightening torque: Locknut: 42 Nm (4.2 m·kgf, 30 ft·lbf) Rear torsion springs EWS00750 1 2 (a) (b) 1. Spring preload adjusting nut 2. Distance A 3. Locknut 3 WARNING The left and right
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 47
    Control functions To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting ring in direction (b). (a) 1. 2-up adjusting block (b) TIP G 1. Spring preload
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 48
    Control functions ESU14010 Adjusting the rebound damping force of the rear shock absorber (RS90GT / RS90LTGT) EWS00161 WARNING Do not turn the remote adjusting dial while the snowmobile is moving as this could cause loss of control, an accident, and injury. ECS00291 Rebound damping setting:
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 49
    Control functions Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) ESU11046 TIP Use the special wrench in the owner's tool kit
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 50
    Control functions 1 (b) 1 2 (a) 1. Special wrench Locknut tightening torque: 35 Nm (3.5 m·kgf, 25 ft·lbf) RST90 / RST90GT EWS00770 WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 1. Loosen the locknut
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 51
    Control functions 1 2 3 5 4 1. 2. 3. 4. 5. Locknut Control rod adjusting nut Standard position Adjustable range Red paint area 3. Tighten the locknut while holding the adjusting nut in place. NOTICE: Always tighten the locknut against the adjusting nut, and then tighten the locknut to the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 52
    inspection and maintenance procedures and schedules described in the Owner's Manual. EWS00191 WARNING Failure to inspect or maintain the vehicle operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 53
    Pre-operation checks ITEM CHECKS Check the deflection. Adjust if necessary. Check for wear and damage. If necessary, have a Yamaha dealer replace track. PAGE Drive track 98 Slide runners Steering Lights, signals and switches Throttle lever Throttle override system (T.O.R.S.) • Check for wear
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 54
    Operation ESU13500 Read the Owner's Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer. EWS00201 WARNING Failure to
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 55
    Operation 1 1 2 1. Start 4. 5. Warm up the engine until it runs smoothly. Be sure the low coolant temperature indicator light has gone out before operation. (See page 17 for detailed information about the indicator light.) Apply the parking brake. 1. Run position 2. Off position 3. Fully open
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 56
    must be changed and the oil filter cartridge replaced. If any engine trouble should occur during the engine break-in period, immediately have a Yamaha riding safely. Before operating the snowmobile, read this Owner's Manual completely and understand the operation of the controls. ESU11310 Break-
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 57
    control of the throttle and brake, and master turning techniques in this area before trying more difficult terrain. Set the parking brake and follow the instructions on page 48 to start the engine. Once the engine has warmed up, you are ready to begin riding your snowmobile. G Many surfaces such as
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 58
    of your snowmobile. Riding uphill EWS00231 WARNING Operation on slopes can lead to loss of control if proper techniques are not used. Follow these instructions to reduce your risk of an accident. Do not try steeper or more difficult inclines until you have developed your skill on gentle slopes
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 59
    WARNING Driving across the face of a slope ("sidehilling") can lead to overturn or loss of control if proper techniques are not used. Follow these instructions to reduce your risk of an accident. Do not try steeper or more difficult inclines until you have developed your skill on gentle slopes
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 60
    Operation Sand Rocks G Grass G Bare pavement Other surfaces that should be avoided for the sake of drive track and slide runner life are: G Glare ice surfaces G Snow mixed with a lot of dirt and sand All of the above surfaces have one thing in common in regard to drive track and slide runners:
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 61
    Operation ESU11394 Driving EWS00300 RS90GT / RS90LTGT / RST90GT WARNING Be sure to read the "SAFETY INFORMATION" section on page 6 and the "Riding your snowmobile" section on page 50 carefully before operating the snowmobile. 1 2 3 TIP Make sure that the engine is warmed up enough before riding
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 62
    Operation 1 1. Pull out. 2. Slide to "REV" (reverse). 3. Release. 1. Off G TIP The reverse buzzer beeps while the shift lever is in reverse. 2. While squeezing the brake lever, release the parking brake by moving the parking brake lever to the right, and then release the brake lever. Push down
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 63
    Operation G G If transporting the snowmobile in an open trailer or truck, put a tight fitting cover on the snowmobile. A cover specifically designed for your snowmobile is best. This will help keep foreign objects out of the cooling vents, and also help protect the snowmobile against damage from
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 64
    has moving parts that can catch on body parts or clothing, and electrical parts that can cause shocks or fires. G Running the engine while servicing can lead to eye injury, burns, fire, or carbon monoxide poisoning-possibly leading to death. See page 6 for more information about carbon monoxide
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 65
    Periodic maintenance and adjustment ESU11461 Periodic maintenance chart for the emission control system Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 66
    Periodic maintenance and adjustment ESU11564 General maintenance and lubrication chart INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY Seasonally or 4000 km (2500 mi) (200 hr) PAGE Engine oil * Engine oil filter cartridge Cooling system • Change (warm engine before draining). •
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 67
    Periodic maintenance and adjustment INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY Seasonally or 4000 km (2500 mi) (200 hr) PAGE * * * Slide runners Skis and ski runners Steering system • Check for wear and damage. • Replace if necessary. • Check for wear and damage. • Replace if
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 68
    owner's tool kit is located in the storage pouch. (See page 31 for information on how to access the storage compartment.) The service information included in this manual and the tools provided in the owner's tool kit are intended to assist you in the performance of preventive maintenance and minor
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 69
    Periodic maintenance and adjustment ECS00940 NOTICE G G Be sure to slide the covers onto the short end of each hexagon wrench before placing the wrenches in the tool kit. Securely tie the strap around the tool kit. 1 2 2 3 1 4 3 1. Fastener 2. Shroud 3. Shroud stay 1. 2. 3. 4. Hexagon wrench
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 70
    the fuel tank cover. 1 1. Auxiliary DC jack coupler 3. Remove the screws, and then remove the cable guide. 2 1 2. Fit the projections on the side cover into the slots as shown. 1. Screw 2. Cable guide 4. Loosen the quick fastener screws. 3. 4. Tighten the fasteners. Install the shroud. 64
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 71
    2. Place the top cover in the original position, making sure to fit the projections on the cover into the slots in the headlight unit. 1. Cable guide 5. 6. Connect the auxiliary DC jack coupler, and then fasten the auxiliary DC jack lead with the plastic band. Install the left side cover and the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 72
    Periodic maintenance and adjustment Top cover (RST90GT) To remove the top cover 1. Remove the shroud and the left side cover. (See the above procedures.) 2. Disconnect the auxiliary DC jack coupler. 1 1. Windshield stay rubber cover 5. 6. 1 1. Auxiliary DC jack coupler Loosen the quick fastener
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 73
    Periodic maintenance and adjustment 2 1 3. 4. 5. 6. 7. Tighten the quick fastener screws. Place the windshield stay rubber covers in their original position. Install the handlebar cover. Connect the auxiliary DC jack coupler. Install the left side cover and the shroud. 1. Shroud latch 2. Shroud
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 74
    For example, a very white center electrode porcelain color could indicate an intake track air leak or carburetion problem for that cylinder. Do not attempt to diagnose such problems yourself. Instead, take the snowmobile to a Yamaha dealer for inspection and possible repairs. You should periodically
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 75
    Periodic maintenance and adjustment When installing the spark plug, always clean the gasket surface. Wipe off any grime from the threads and tighten the spark plug to the specified torque. Spark plug tightening torque: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) ECS00382 ESU14071 Adjusting the throttle lever
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 76
    Periodic maintenance and adjustment 6. To increase the throttle lever free play, turn the adjusting bolt in direction (a). To decrease the throttle lever free play, turn the adjusting bolt in direction (b). 1 1 (a) 2 (b) 1. Slot 2. Projection 2 9. Fit the weatherstrip on the headlight unit into
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 77
    Periodic maintenance and adjustment 3. 4. Loosen the locknut. To increase the throttle lever free play, turn the adjusting bolt in direction (a). To decrease the throttle lever free play, turn the adjusting bolt in direction (b). 4. Unhook the headlight unit as shown, then lift it up and move it
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 78
    Periodic maintenance and adjustment ESU11863 1 Checking the throttle override system (T.O.R.S.) EWS00352 WARNING When checking the T.O.R.S., take precautions to avoid snowmobile movement which could cause an accident: G Make sure that the throttle lever moves smoothly with the engine off before
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 79
    Periodic maintenance and adjustment RS90GT / RS90LTGT 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud, the left and right side covers, and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt on each side of the snowmobile.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 80
    Periodic maintenance and adjustment 8. 1 Install the headlight unit, making sure to fit the slots on its bottom onto the projections on its stay. 1 1 1. Air filter case cover fastener 2 1. Slot 2. Projection 6. Lift up the air filter element frame and check the air filter element. If there is
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 81
    Periodic maintenance and adjustment 3. Remove the air filter case cover by unhooking the case fastener and the case cover fasteners. 5. 6. Place the air filter element frame in the original position. Install the air filter case cover and attach the air filter case by hooking all the fasteners. Close
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 82
    Periodic maintenance and adjustment 1 1. Headlight unit 7. 5. Remove the air filter case cover by unhooking the fasteners. 8. 1 Place the air filter element frame in the original position, and then install the air filter case cover by hooking the fasteners. Install the headlight unit, making
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 83
    system does not need to be adjusted, even for operation at high altitude. RST90: Your snowmobile can be adjusted to overcome most of the problems found in highaltitude riding. Carburetor adjustments are the most important. Less air at high altitude makes the air/fuel ratio too rich, which can
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 84
    Periodic maintenance and adjustment ECS00482 NOTICE G G G Do not run the engine with too much or not enough oil in the oil tank. Oil could spray out or the engine could be damaged. Be sure to change the engine oil after the first 800 km (500 mi) of operation, and every 4000 km (2500 mi)
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 85
    Periodic maintenance and adjustment 6. If the engine oil is below the "L" level mark, add sufficient oil of the recommended type to raise it to the "H" level mark. (See page 122 for the recommended oil.) NOTICE: When adding the engine oil, be careful not to fill above the "H" level mark on the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 86
    Periodic maintenance and adjustment RS90GT / RS90LTGT / RST90GT RST90 2 1 1. Screw 2. Right lower cover 1. Oil level gauge coupler 2. Oil filler cap 5. Remove the bottom panel by removing the bolts. 8. Remove the oil filler cap and the cylinder head cap, and then remove the engine oil drain
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 87
    Periodic maintenance and adjustment RST90GT 2 3 1 1 1. Cylinder head cap 1. Engine oil drain bolt (crankcase) 2. Gasket 3. " " mark RS90GT / RS90LTGT / RST90GT TIP 2 G G 1 1. Engine oil drain bolt (oil tank) 2. Gasket G A " " mark is stamped on the crankcase near the engine oil drain bolt
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 88
    Periodic maintenance and adjustment stick. NOTICE: When adding the engine oil, be careful not to fill above the "H" level mark on the dipstick. Use only the recommended oil. (See page 122.) Make sure that no foreign material enters the engine oil tank. [ECS00462] RS90GT / RS90LTGT / RST90GT 1. O-
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 89
    Periodic maintenance and adjustment Recommended engine oil: See page 122. Oil quantity: With oil filter cartridge replacement: RS90GT 3.3 L (3.49 US qt, 2.90 Imp.qt) RS90LTGT 3.3 L (3.49 US qt, 2.90 Imp.qt) RST90 3.0 L (3.17 US qt, 2.64 Imp.qt) RST90GT 3.3 L (3.49 US qt, 2.90 Imp.qt) Without oil
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 90
    Periodic maintenance and adjustment When the hissing sound has stopped, press down on the cap while turning counterclockwise and remove it. RS90GT / RS90LTGT 2. 3. Remove the top cover. (See page 63 for removal procedures.) Check the coolant level in the coolant recovery tank when the engine is cold
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 91
    Periodic maintenance and adjustment 3. 1 Remove the coolant reservoir cap, fill the reservoir with the recommended coolant, and then install the cap. 2 1. Coolant reservoir cap 2. Coolant recovery tank cap 4. Remove the coolant recovery tank cap, add the recommended coolant until it reaches the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 92
    Periodic maintenance and adjustment TIP If you find any leaks, consult a Yamaha dealer. 7. Check the coolant level in the coolant reservoir. If it is not full, remove the coolant reservoir cap, fill the reservoir with the recommended coolant, and then install the cap. Install the top cover. 1. "COLD
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 93
    Periodic maintenance and adjustment Remove the shroud, the right side cover, and the top cover (RST90GT), or open the shroud (RST90). [See page 63 (RST90GT) or page 67 (RST90) for the procedures.] 3. Remove the coolant reservoir cap and add coolant until it reaches the "COLD LEVEL" mark. RST90 2.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 94
    Periodic maintenance and adjustment ESU13912 V-belt EWS00402 WARNING G New V-belt width: 34.5 mm (1.36 in) V-belt wear limit width: 32.5 mm (1.28 in) 3. Install the drive guard, and then install the left side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). G
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 95
    Periodic maintenance and adjustment RS90GT / RS90LTGT / RST90GT 6. 2 7. Remove the V-belt from the secondary sheave assembly and primary sheave assembly. Temporarily install the new V-belt on the secondary sheave assembly only, and then measure the V-belt position. Do not force the V-belt between
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 96
    Periodic maintenance and adjustment 11. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Secondary sliding sheave 2. Secondary fixed sheave 12. Install the V-belt between the secondary sliding and fixed sheaves. 1. V-belt position
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 97
    Periodic maintenance and adjustment RS90GT / RS90LTGT / RST90GT RST90 1 1. Left lower cover 1. Dipstick 14. Install the drive guard, and then install the left side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). ESU13922 4. Drive chain housing To check the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 98
    in the brake lever indicates a failure in the brake system. Do not operate the snowmobile if you find any problems in the brake system. You could lose braking ability, which could lead to an accident. Ask a Yamaha dealer to lever damage when the snowmobile is placed on its side for service. 92
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 99
    Periodic maintenance and adjustment Test the brake at a low speed when starting out to make sure that it is working properly. If the brake does not provide proper braking performance, inspect the brake for wear or brake fluid leakage. (See the following section for more details.) RST90 / RST90GT
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 100
    Periodic maintenance and adjustment 1. Parking brake pad wear limit Parking brake pad wear limit: 1.2 mm (0.047 in) 3. Install the right side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). To adjust the parking brake As the parking brake pads wear, adjustment may
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 101
    Periodic maintenance and adjustment 8. Install the right side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). Brake fluid replacement is necessary when the following components are replaced during the periodic maintenance or if they are damaged or leaking. G All oil
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 102
    Periodic maintenance and adjustment To align the skis 1. 2. Turn the handlebar so the skis face straight ahead. Check the following for ski alignment: G Skis are facing forward. G Ski toe-out (distance A - distance B) is within specification. 1 1. Ski runner wear limit 1 2 1. Ski wear limit 2. Ski
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 103
    Periodic maintenance and adjustment 3. Move the handlebar up or down to adjust the handlebar height to the desired position. NOTICE: Make sure that the projection on the handlebar is not installed into the area shown. [ECS00571] If excessive free play is felt, consult a Yamaha dealer. RST90 To
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 104
    allow the drive track to spin, a suitable stand must be used to support the rear of the snowmobile. Never allow anyone to hold the rear of the is damaged to the depth where fabric reinforcement material is visible or support rods are broken. Otherwise, track dam- Checking the drive track alignment
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 105
    Periodic maintenance and adjustment 2 1 1. Slide runner Measuring the drive track deflection 1. Lay the snowmobile on its side. 2. Measure the drive track deflection with a spring scale. Pull at the center of the drive track with a force of 100 N (10 kgf, 22 lbf). 1. Drive track deflection 2.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 106
    Periodic maintenance and adjustment 4. Loosen the locknut on the left and the right sides of the snowmobile, then align the drive track by turning the adjusting bolt on each side. Drive track alignment Left adjusting bolt Right adjusting bolt Shifted to right Turn out Turn in Shifted to left Turn in
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 107
    Periodic maintenance and adjustment Shifted to right 1. Rear axle nut 2. 3. 4. Lift the rear of the snowmobile onto a suitable stand to raise the drive track off the ground. Start the engine and rotate the drive track one or two turns. Stop the engine. Align the drive track by turning the left
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 108
    Periodic maintenance and adjustment 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Lower the snowmobile to the ground. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) EWS00511 WARNING Do not
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 109
    Periodic maintenance and adjustment RS90LTGT 1 1. Grease nipple 1. Grease nipple RST90 1 1 1. Grease nipple RS90GT 1. Grease nipple 1 RST90GT 1 1. Grease nipple 1. Grease nipple ESU14181 Replacing a headlight bulb RS90GT / RS90LTGT 1. 2. Remove the top cover. (See page 63 for removal
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 110
    Periodic maintenance and adjustment 1. Screw 1. Bulb holder 6. Install a new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 111
    Periodic maintenance and adjustment 1 1 2 1. Headlight coupler 2. Bulb holder cover 1. Do not touch the glass part of the bulb. 4. Unhook the bulb holder, and then remove the burnt-out bulb. 6. 7. 1. 2. Bulb type: Halogen bulb Install the bulb holder cover, and then connect the headlight coupler
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 112
    Periodic maintenance and adjustment illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1 1. Headlight unit 1 4. 5. Disconnect the headlight coupler. Remove the bulb holder cover. 1. Do not touch the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 113
    Periodic maintenance and adjustment (b) 1 1 1. Weatherstrip (a) 1. Headlight beam adjusting screw 11. Install the headlight unit bolts and windshield stay bolts, and then tighten them to their specified torques. Tightening torques: Headlight unit bolt: 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf) Windshield
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 114
    Periodic maintenance and adjustment Batteries produce explosive gases. Keep sparks, flame, cigarettes, etc. away. Ventilate when charging or using in an enclosed space. Always shield your eyes when working near batteries. KEEP OUT OF THE REACH OF CHILDREN. Charge or have a Yamaha dealer charge the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 115
    Periodic maintenance and adjustment ESU14192 Replacing a fuse EWS00550 RST90GT WARNING Be sure to use the specified fuse. A wrong fuse could cause electrical system damage or A FIRE HAZARD. ECS00631 2 1 NOTICE Be sure to turn the main switch to the off position and disconnect the negative
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 116
    Periodic maintenance and adjustment 7. 2 1 Lift up the air filter case, disconnect the ISC (Idle Speed Control) unit inlet hose and cylinder head breather hose from the case, and then remove the case. 1 1. Air filter case fastener 2. Air temperature sensor coupler 5. Loosen the joint clamp
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 117
    Periodic maintenance and adjustment RS90GT / RS90LTGT 1 1 1. Negative battery lead 10. Replace the blown fuse with one of the proper amperage. 23 4 5 6 7 8 1. Spare fuse 2. Fuel injection system fuse 3. Main fuse 1. 2. 3. 4. 5. 6. 7. 8. Fuse box "IGN" (ignition) fuse "FAN" (radiator fan)
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 118
    Periodic maintenance and adjustment RST90GT 1 27 3 4 5 6 7 Specified fuses: Main fuse: 40.0 A Fuel injection system fuse: 10.0 A Ignition fuse: 15.0 A Radiator fan fuse: RS90GT 5.0 A RS90LTGT 5.0 A Headlight fuse: 20.0 A Signaling system fuse: 7.5 A Auxiliary DC jack fuse: 3.0 A Helmet shield
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 119
    Periodic maintenance and adjustment 15. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 1. Air filter case fastener 4. Loosen the joint clamp screws. 1 1. Weatherstrip 16. Install the headlight unit bolts and windshield stay bolts (RST90GT),
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 120
    Periodic maintenance and adjustment 1. Crankcase breather hose clamp (crankcase side) 2. Crankcase breather hose 1. Main fuse 2. Spare main fuse 7. Lift up the air filter case, slide the crankcase breather hose clamp (air filter case side) down, disconnect the crankcase breather hose from the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 121
    Periodic maintenance and adjustment Specified fuses: Main fuse: 30.0 A Spare main fuse: 30.0 A Headlight fuse: 20.0 A Signaling system fuse: 10.0 A Auxiliary DC jack fuse: 3.0 A Carburetor warmer fuse: 20.0 A Ignition fuse: 15.0 A Spare fuses: 20.0 A, 15.0 A, 10.0 A, 3.0 A 10. Connect the negative
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 122
    Troubleshooting ESU14162 Engine turns over but does not start 1. Fuel system No fuel supplied to combustion chamber • No fuel in tank: Supply fuel. ↓ • Clogged fuel line:
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 123
    Troubleshooting ↓ • Worn or damaged gasket: Replace gasket. ↓ • Worn or damaged piston and cylinder: Ask a Yamaha dealer to check. To start the engine using the booster battery 1.
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 124
    Troubleshooting 8. 9. Start the engine. Disconnect the black (-) jumper cable from the black (-) connecting lead, and then pull the cover completely over the lead terminal. Disconnect the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 125
    Troubleshooting Engine power is low G G G G G G Low coolant temperature indicator light is dealer to check. Oily or dirty V-belt or primary and secondary sheave assembly surfaces: Clean. Problem with driveline: See "V-belt twists" above. V-belt slips or becomes extremely hot G G Engine
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 126
    Storage ESU13940 Long-term storage requires some preventive procedures to guard against deterioration. marks. If the windshield is scratched, use a quality plastic polishing compound after washing. Cleaning Thoroughly clean the snowmobile, inside and out, to remove the corrosive salts and acids
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 127
    is designed for it. Do not use a plastic or vinyl cover-condensation could be trapped underneath which could increase the chances of rusting. Returning to service after storage When returning your snowmobile to service, install the V-belt and battery and adjust the drive track. 121
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 128
    × 2.61 in) Idling speed: RS90GT 1250-1350 r/min RS90LTGT 1250-1350 r/min RST90 1300-1500 r/min RST90GT 1250-1350 r/min Engine oil: Recommended grade: API service SG type or higher, JASO standard MA Recommended brand: YAMALUBE 122
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 129
    Specifications Overall reduction ratio: RS90GT 6.02-1.58 :1 RS90LTGT 6.18-1.63 :1 RST90 6.74-1.77 :1 RST90GT 6.44-1.70 :1 Sheave distance: 267.0-270.0 mm (10.51-10.63 in) Sheave offset: 13.5-16.5 mm (0.53-0.65 in) Engagement speed (Subject to change according to elevation settings.): RS90GT 3100-
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 130
    Specifications Tail/brake light: RS90GT LED RS90LTGT LED RST90GT LED Meter lighting: RST90 14 V, 50 mA × 6 Meter lighting: RS90GT LED RS90LTGT LED RST90GT LED High beam indicator light: RST90 14 V, 80 mA × 1 High beam indicator light: RS90GT LED RS90LTGT LED RST90GT LED Warning light: RS90GT LED
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 131
    Consumer information ESU12481 Identification number records Record the frame serial number, engine serial number (Primary ID), and key identification number in the spaces provided for assistance when ordering spare parts from a Yamaha dealer. Also, record and keep the ID numbers in a separate place
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 132
    Consumer information The Vehicle Emission Control Information label is affixed at the location in the illustration. This label shows specifications related to exhaust emissions as required by federal law, state law and Environment Canada. ESU13461 Vehicle Emission Control Information label RS90GT
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 133
    and maintain the snowmobile as specified in the appropriate Owner's Manual. WARRANTY TRANSFER: To transfer any remaining warranty from the original . An inspection and registration fee will be charged for this service. EMISSION CONTROL SYSTEM WARRANTY Yamaha Motor Corporation, USA also warrants
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 134
    of having the dealer do them? A. Yes, if you are a qualified snowmobile mechanic and follow the procedures specified in the Owner's and Service Manual. We do recommend, however, that items requiring special tools or equipment be done by a Yamaha snowmobile dealer. Q. Under what conditions is the
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 135
    machine requires warranty service, you must take it to any authorized Yamaha snowmobile dealer within the continental United States. Be sure to bring your warranty identification card or other valid proof of the original date of purchase. If a question or problem arises regarding warranty, first
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 136
    Consumer information ESU12510 YAMAHA EXTENDED SERVICE (Y.E.S.) 130
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 137
    Index A Air filter, checking...73 Auxiliary DC jack ...24 B Backrest (RST90 / RST90GT) ...30 Battery...108 Brake and parking brake ...92 Brake lever ...25 Break-in...50 C Carburetors (RST90)...77 Center shock absorber and rear torsion springs, adjusting spring preload (RST90 / RST90GT) ...39 Control
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 138
    override system (T.O.R.S.) ...12 Throttle override system (T.O.R.S.), checking...72 Tool kit...62 Tow hitch bracket (RST90 / RST90GT) ...35 Transporting ...56 Troubleshooting ...116 Two-up (2-up) adjusting blocks, adjusting (RST90)...41 V Valve clearance...77 V-belt...88 V-belt holders ...28 Vehicle
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 139
  • 2011 Yamaha Motorsports RS Venture GT | Owners Manual - Page 140
    YAMAHA MOTOR CO., LTD. PRINTED IN JAPAN 2010.06-0.7×1 CR PRINTED ON RECYCLED PAPER
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

OWNER’S MANUAL
8JA-28199-11
LIT-12628-02-95
Read this manual carefully
before operating this vehicle.
RS90GTA
RS90LTGTA
RST90A
RST90GTA