2010 Yamaha Motorsports V Star Silverado Owners Manual - Page 78

2010 Yamaha Motorsports V Star Silverado Manual

Get 2010 Yamaha Motorsports V Star Silverado PDF manuals and user guides View all 2010 Yamaha Motorsports V Star Silverado manuals

Page 78 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT 4. Remove the brake pedal free play adjusting nut, and then disconnect the brake rod from the brake camshaft lever. EAU25512 To install the rear wheel 1. Install the rear wheel, wheel axle, final gear case, and drive shaft by pushing the wheel forward and guiding the drive shaft into the middle gear universal joint. 1. Bolt 2. Final gear case 7 1. 2. 3. 4. 5. 6. Brake pedal free play adjusting nut Brake camshaft lever Bolt and nut (shoe plate) Brake torque rod Bolt and nut (swingarm) Brake rod 5. Remove panel A. (See page 7-8.) 6. Remove the bolts that secure the final gear case to the swingarm. 7. Lift the rear wheel off the ground according to the procedure on page 7-34. 8. While supporting the drive shaft, pull the rear wheel back to remove the following parts as an assembly: wheel, wheel axle, final gear case, and drive shaft. TIP Make sure to support the drive shaft as it is being pulled out. 1. Middle gear universal joint 2. Drive shaft 2. Install the final gear case bolts. 3. Install the brake rod onto the brake camshaft lever, and then install the brake pedal free play adjusting nut onto the brake rod. 4. Install the brake torque rod bolt and nut at the brake shoe plate. 5. Install the panel. 7-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-37
7
4.
Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
5.
Remove panel A. (See page 7-8.)
6.
Remove the bolts that secure the
final gear case to the swingarm.
7. Lift the rear wheel off the ground
according to the procedure on
page 7-34.
8. While supporting the drive shaft,
pull the rear wheel back to remove
the following parts as an assem-
bly: wheel, wheel axle, final gear
case, and drive shaft.
TIP
Make sure to support the drive shaft as
it is being pulled out.
EAU25512
To install the rear wheel
1.
Install the rear wheel, wheel axle,
final gear case, and drive shaft by
pushing the wheel forward and
guiding the drive shaft into the mid-
dle gear universal joint.
2.
Install the final gear case bolts.
3.
Install the brake rod onto the brake
camshaft lever, and then install the
brake pedal free play adjusting nut
onto the brake rod.
4. Install the brake torque rod bolt
and nut at the brake shoe plate.
5.
Install the panel.
1.
Brake pedal free play adjusting nut
2.
Brake camshaft lever
3.
Bolt and nut (shoe plate)
4.
Brake torque rod
5.
Bolt and nut (swingarm)
6.
Brake rod
1. Bolt
2.
Final gear case
1.
Middle gear universal joint
2.
Drive shaft