2010 Yamaha Motorsports V Star Silverado Owners Manual - Page 76

2010 Yamaha Motorsports V Star Silverado Manual

Page 76 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm. EAU24360 Front wheel EAU24601 To remove the front wheel EWA10821 WARNING To avoid injury, securely support the vehicle so there is no danger of it falling over. 1. Disconnect the speedometer cable from the front wheel. 1. Wheel axle 2. Front wheel axle pinch bolt 7 1. Speedometer cable 3. Lift the front wheel off the ground according to the procedure on page 7-34. 4. Pull the wheel axle out, and then remove the wheel. NOTICE: Do not apply the brake after the wheel has been removed together with the brake disc, otherwise the brake pads will be forced shut. [ECA11071] EAU24933 2. Loosen the front wheel axle pinch bolt, then the wheel axle. To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 7-35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102

PERIODIC MAINTENANCE AND ADJUSTMENT
7-35
7
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
EAU24360
Front wheel
EAU24601
To remove the front wheel
WARNING
EWA10821
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Disconnect the speedometer ca-
ble from the front wheel.
2.
Loosen the front wheel axle pinch
bolt, then the wheel axle.
3.
Lift the front wheel off the ground
according to the procedure on
page 7-34.
4.
Pull the wheel axle out, and then
remove the wheel.
NOTICE:
Do
not apply the brake after the
wheel has been removed to-
gether with the brake disc, oth-
erwise the brake pads will be
forced shut.
[ECA11071]
EAU24933
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jections mesh with the slots.
1.
Speedometer cable
1.
Wheel axle
2.
Front wheel axle pinch bolt