2010 Yamaha Motorsports V Star Silverado Owners Manual - Page 55

PERIODIC MAINTENANCE AND ADJUSTMENT Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 5. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) EAU33383 Cleaning the air filter element The air filter element should be cleaned at the intervals specified in the periodic maintenance and lubrication chart. Clean or, if necessary, replace the air filter element more frequently if you are riding in unusually wet or dusty areas. 1. Remove the air filter case cover by removing the bolts. To change the final gear oil 1. Place an oil pan under the final gear case to collect the used oil. 2. Remove the oil filler bolt and drain bolt to drain the oil from the final gear case. 3. Install the final gear oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil drain bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 6. Check the final gear case for oil leakage. If oil is leaking, check for the cause. 4. Refill with the recommended final gear oil to the brim of the filler hole. Recommended final gear oil: SAE80 API GL-4 Hypoid gear oil Oil quantity: 0.19 L (0.20 US qt, 0.17 Imp.qt) 7 1. Air filter case cover 2. Bolt TIP GL4 is a quality rating. Hypoid gear oils rated GL5 or GL6 may also be used. 7-14 2. Pull the air filter element out. 3. Lightly tap the air filter element to remove most of the dust and dirt, and then blow the remaining dirt out with compressed air as shown. If the air filter element is damaged, replace it.