2010 Yamaha Motorsports FX Nytro MTX Owners Manual - Page 59
2010 Yamaha Motorsports FX Nytro MTX Manual
Page 59 highlights
Periodic maintenance and adjustment 7. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap. 8. Connect the oil level gauge coupler. 9. Install the right side cover and the shroud. To change the engine oil (with or without oil filter cartridge replacement) 1. Place the snowmobile on a level surface and apply the parking brake. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Remove the shroud, the left side cover, the right side cover, and the drive guard. (See pages 18 and 46 for removal procedures.) 4. Remove the left lower cover, the right lower cover, and the bottom panel. 2 2 1 3 1. 2. 3. 4. Right lower cover Quick fastener Bolt Washer 3 4 2 1 2 2 2 4 1. 2. 3. 4. 2 3 Left lower cover Quick fastener Bolt Washer 3 1 1. Bottom panel 2. Quick fastener 5. 6. Place an oil pan under the oil tank to collect the used oil. Disconnect the oil level gauge coupler. 1. Oil level gauge coupler 2. Oil filler cap 53