2010 Yamaha Motorsports FX Nytro MTX Owners Manual - Page 23
2010 Yamaha Motorsports FX Nytro MTX Manual
Page 23 highlights
Control functions ESU13520 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 3. Tighten the locknut securely after adjusting the brake lever. ESU10581 Parking brake lever When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. 1. Brake lever 1. Parking brake lever TIP When the brake lever is operated, the brake light will illuminate. The brake lever is equipped with a position adjuster. To adjust the brake lever position: 1. Loosen the locknut. 2. While lightly pushing the brake lever in direction (a), finger tighten the adjusting bolt to set the brake lever to the desired position. To release the parking brake, move the parking brake lever to the right. ESU13032 Shift lever The shift lever is used to put the snowmobile into forward or reverse. Before shifting, wait for the snowmobile to come to a complete stop with the engine idling. Pull the shift lever out, slide it to "FWD" or to "REV" until it stops, and then push it back in. 1. Locknut 2. Adjusting bolt 17