2010 Yamaha Motorsports C3 Owners Manual - Page 59
2010 Yamaha Motorsports C3 Manual
Page 59 highlights
Troubleshooting PERIODIC MAINTENANCE AND ADJUSTMENT EAU24204 EAU25881 EAU1722A Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. Troubleshooting Although Yamaha scooters receive a thorough inspection before shipment from the factory, trouble may occur during operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting and loss of power. The following troubleshooting charts represent quick and easy procedures for checking these vital systems yourself. However, should your scooter require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the scooter properly. Use only genuine Yamaha replacement parts. Imitation parts may look like Yamaha parts, but they are often inferior, have a shorter service life and can lead to expensive repair bills. 1 2 3 4 5 6 7 8 9 1 2 ZAUM00** 1. Turn signal light lens 2. Bulb 2 ZAUM00** 1 1. Turn signal light lens 2. Bulb 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screw. NOTICE: Do not overtighten the screw, otherwise the lens may break.[ECA11191] 6-59 6-24