2010 Yamaha Motorsports C3 Owners Manual - Page 58
2010 Yamaha Motorsports C3 Manual
Page 58 highlights
Tail/brake light bulb, replacing PERIODIC MAINTENANCE AND ADJUSTMENT 1. Remove the headlight unit by removing the screws. 1 2 3 4 ZAUM00** EAU1722A 3. Remove the headlight bulb holder by turning it counterclockwise, and then remove the burnt-out bulb. EAU24133 Replacing the tail/brake light bulb 1. Remove the tail/brake light lens by removing the screws. 1 2(✕2) 1 2 1 5 6 7 8 9 1. Headlight unit 2. Screw ZAUM00** 1. Headlight bulb holder ZAUM00** 2. Disconnect the headlight coupler, and then remove the bulb cover. 2 1 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Tail/brake light lens 2. Bulb ZAUM00** 1. Headlight coupler 2. Bulb cover 6-58 6-23 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break.[ECA10681]