2010 Yamaha Motorsports C3 Owners Manual - Page 47
2010 Yamaha Motorsports C3 Manual
Page 47 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT TIP The coolant should be between the minimum and maximum level marks. 3. If the coolant is at or below the minimum level mark, remove panel B and the reservoir cap. (See page 66.) WARNING! Remove only the coolant reservoir cap. Never attempt to remove the radiator cap when the engine is hot.[EWA15161] 4. Add coolant or distilled water to raise the coolant to the maximum level mark, and install the coolant reservoir cap and the panel. NOTICE: If coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since it is harmful to the engine. If water has been used instead of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced.[ECA10472] Coolant reservoir capacity: 0.26 L (0.27 US qt, 0.23 Imp.qt) EAU1722A 1 2 EAU33031 1 2 ZAUM00** 1. Maximum level mark 2. Minimum level mark Changing the coolant The coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. Have a Yamaha dealer change the coolant. WARNING! Never attempt to remove the radiator cap when the engine is hot.[EWA10381] 3 4 5 6 7 8 9 1 ZAUM00** 1. Coolant reservoir cap 6-47 6-12