2009 Yamaha Motorsports VMAX Owners Manual - Page 67
2009 Yamaha Motorsports VMAX Manual
Page 67 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 2. Loosen the final gear oil check bolt until oil flows out. Tightening torques: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 16 ft·lbf) Final gear oil check bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 2 To change the final gear oil 1. Place the vehicle on a level surface. 2. Place an oil pan under the final gear case to collect the used oil. 3. Remove the final gear case breather cap by removing the bolt and washer. 4. Remove the oil drain bolt and the filler bolt to drain the oil from the final gear case. 5. Replace the final gear oil drain bolt washer, and then install the final gear oil drain bolt. 6. Tighten the final gear oil drain bolt to the specified torque. Tightening torque: Final gear oil drain bolt: 23 Nm (2.3 m·kgf, 16 ft·lbf) 2 3 4 5 6 7 8 9 1 3 1. Final gear oil drain bolt 2. Final gear oil check bolt 3. Final gear oil drain bolt washer 7. Refill with the recommended final gear oil. Recommended final gear oil: Shaft drive gear oil (Part No.: 9079E-SH001-00) Oil quantity: 0.30 L (0.32 US qt, 0.26 Imp.qt) 3. If no oil flows out, remove the final gear oil filler bolt. (See steps 3-4 under "To change the final gear oil" for oil filler bolt removal.) 4. Pour the recommended type of oil in the final gear oil filler hole until it flows out of the oil check bolt hole. 5. Install the final gear oil filler bolt and final gear oil check bolt, and then tighten them to their specified torques. 4 3 2 1 8. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 16 ft·lbf) 1. Final gear oil filler bolt 2. Final gear case breather cap 3. Washer 4. Final gear case breather cap bolt 7-16 9. Install the final gear case breather cap by installing the washer and