2009 Yamaha Motorsports VMAX Owners Manual - Page 22
2009 Yamaha Motorsports VMAX Manual
Page 22 highlights
INSTRUMENT AND CONTROL FUNCTIONS Tripmeters Turn the key to "ON". Push "SELECT" to switch the display between the tripmeters "TRIP-1" and "TRIP-2" in the following order. TRIP-1 → TRIP-2 → TRIP-1 When the fuel amount in the fuel tank decreases to 3.9 L (1.03 US gal, 0.86 Imp.gal), the fuel warning indicator starts flashing, and the tripmeter automatically changes to the fuel reserve tripmeter "TRIP-F" and starts counting the distance traveled from that point. In that case, push "SELECT" to switch the display between the various tripmeters in the following order: TRIP-F → TRIP-1 → TRIP-2 → TRIP-F To reset a tripmeter, select it by pushing "SELECT", and then push "RESET" for at least one second. If you do not reset the fuel reserve tripmeter manually, it resets itself automatically and the display returns to the prior meter after refueling and traveling 5 km (3 mi). Select mode The various functions of this multi-function display are adjusted in the Select mode. TIP ● ● maintenance counters 1 2 3 4 5 6 7 8 9 ● ● The transmission must be in neutral to change settings in this mode. Shifting the transmission into gear saves all settings made, then cancels the Select mode and displays the Normal mode in all screens. Depending on the screen, pushing "RESET" saves settings or cancels the Select mode to display the Normal mode. TIP To return to the Normal mode, push "SELECT" to scroll to " ", then push "RESET". Adjusting the brightness This function allows you to adjust the brightness of the tachometer unit panel ("Meter panel"), the tachometer needle ("Needle"), and the speedometer and multi-function displays ("Display") to suit the outside lighting conditions. 1. Push "SELECT" to highlight "Brightness". Push and hold "SELECT" and "RESET" for at least three seconds to enter the Select mode. The following items can be set/adjusted in this mode: ● brightness ● shift timing indicator light ● clock ● stopwatch ● countdown clock ● system status 4-6 2. Push "RESET", then push "SELECT" to scroll through the functions and to highlight an item. 3. Push "RESET"; the brightness lev-