2009 Yamaha Motorsports VMAX Owners Manual - Page 29

INSTRUMENT AND CONTROL FUNCTIONS Right EAU12500 1 Horn switch " " Press this switch to sound the horn. EAU12660 2 1. Engine stop switch " 2. Start switch " " EAU12400 Engine stop switch " / " Set this switch to " " before starting the engine. Set this switch to " " to stop the engine in case of an emergency, such as when the vehicle overturns or when the throttle cable is stuck. EAU12711 (simultaneous flashing of all turn signal lights). The hazard lights are used in case of an emergency or to warn other drivers when your vehicle is stopped where it might be a traffic hazard. ECA10061 / " NOTICE Do not use the hazard lights for an extended length of time with the engine not running, otherwise the battery may discharge. 2 3 4 5 6 7 8 9 Dimmer switch " / " Set this switch to " " for the high beam and to " " for the low beam. EAU12460 Start switch " " Push this switch to crank the engine with the starter. See page 6-1 for starting instructions prior to starting the engine. EAU41700 Turn signal switch " / " To signal a right-hand turn, push this switch to " ". To signal a left-hand turn, push this switch to " ". When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position. The engine trouble warning light will come on when the key is turned to "ON" and the start switch is pushed, but this does not indicate a malfunction. EAU12765 Hazard switch " " With the key in the "ON" position, use this switch to turn on the hazard lights 4-13