2009 Yamaha Motorsports TMAX Owners Manual - Page 62

2009 Yamaha Motorsports TMAX Manual

Get 2009 Yamaha Motorsports TMAX PDF manuals and user guides View all 2009 Yamaha Motorsports TMAX manuals

Page 62 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT torque. Tightening torque: Chain drive oil drain bolt: 20 Nm (2.0 m·kgf, 14.5 ft·lbf) 11. Install the panel. 1 2 3 4 5 6 7 8 9 6. Refill with the specified amount of the recommended oil. Recommended chain drive oil: See page 9-1. Oil quantity: 0.70 L (0.74 US qt, 0.62 Imp.qt) 1 2 1. Maximum level mark 2. Minimum level mark 7. Wipe the dipstick clean, insert it into the oil filler hole (without screwing it in), and then remove it to check the oil level. TIP The chain drive oil should be between the minimum and maximum level marks. 8. If the chain drive oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. 9. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap. ECA15010 NOTICE G Make sure that no foreign material enters the chain drive case. G Make sure that no oil gets on the tire or wheel. 10. Check the chain drive case for oil leakage. If leakage is found, check for the cause. 7-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-16
1
2
3
4
5
6
7
8
9
torque.
6. Refill with the specified amount of
the recommended oil.
7. Wipe the dipstick clean, insert it
into the oil filler hole (without
screwing it in), and then remove it
to check the oil level.
TIP
The chain drive oil should be between
the minimum and maximum level
marks.
8. If the chain drive oil is below the
minimum level mark, add sufficient
oil of the recommended type to
raise it to the correct level.
9. Insert the dipstick into the oil filler
hole, and then tighten the oil filler
cap.
NOTICE
ECA15010
±
Make sure that no foreign mate-
rial enters the chain drive case.
±
Make sure that no oil gets on the
tire or wheel.
10. Check the chain drive case for oil
leakage. If leakage is found, check
for the cause.
11. Install the panel.
Tightening torque:
Chain drive oil drain bolt:
20 Nm (2.0 m
·
kgf, 14.5 ft
·
lbf)
Recommended chain drive oil:
See page 9-1.
Oil quantity:
0.70 L (0.74 US qt, 0.62 Imp.qt)
1. Maximum level mark
2. Minimum level mark
1
2