2009 Yamaha Motorsports TMAX Owners Manual - Page 26
2009 Yamaha Motorsports TMAX Manual
Page 26 highlights
INSTRUMENT AND CONTROL FUNCTIONS oil change indicator "OIL" flashes (i.e. before the periodic oil change interval has been reached), the indicator "OIL" must be reset after the oil change for the next periodic oil change to be indicated at the correct time. The electrical circuit of the indicator can be checked according to the following procedure. 1. Set the engine stop switch to " " and turn the key to "ON". 2. Check that the oil change indicator comes on for a few seconds and then goes off. 3. If the oil change indicator does not come on, have a Yamaha dealer check the electrical circuit. V-belt replacement indicator "V-BELT" V-belt replacement indicator "V-BELT" flashes (i.e. before the periodic V-belt change interval has been reached), the indicator "V-BELT" must be reset after the V-belt change for the next periodic V-belt change to be indicated at the correct time. The electrical circuit of the indicator can be checked according to the following procedure. 1. Turn the key to "ON" and make sure that the engine stop switch is set to " ". 2. If the V-belt replacement indicator does not come on, have a Yamaha dealer check the electrical circuit. Self-diagnosis device 1 1 2 3 4 5 6 7 8 9 1. V-belt replacement indicator "V-BELT" This indicator flashes every 20000 km (12500 mi) when the V-belt needs to be replaced. After changing the V-belt, reset the V-belt replacement indicator. To reset the V-belt replacement indicator, select it by pushing the "SELECT" button until "V-BELT Trip" is displayed, and then push the "RESET" button at least 1 second. When pushing the "RESET" button, "V-BELT Trip" starts flashing. While "V-BELT Trip" is flashing, push the "RESET" button for at least 3 seconds. If the V-belt is changed before the 4-7 1 1. Error code display