2009 Yamaha Motorsports TMAX Owners Manual - Page 25

INSTRUMENT AND CONTROL FUNCTIONS 1 Trip → V-BELT Trip → Odo Oil change indicator "OIL" 1 2 1 1. V-belt replacement tripmeter 3 1. Oil change indicator "OIL" Pushing the "SELECT" button switches the display between the odometer mode and the tripmeter modes in the following order: Odo → Trip-A → Trip-B → OIL Trip → V-BELT Trip → Odo When approximately 3.0 L (0.79 US gal, 0.66 Imp.gal) of fuel remains in the fuel tank, the display will automatically change to the fuel reserve tripmeter mode "F Trip" and start counting the distance traveled from that point. In that case, pushing the "SELECT" button switches the display between the various tripmeter and odometer modes in the following order: Odo → F Trip → Trip-A → Trip-B → OIL 1. Fuel reserve tripmeter 4 5 6 7 8 9 To reset a tripmeter, select it by pushing the "SELECT" button until "F Trip", "Trip-A" or "Trip-B" is displayed. While "F Trip", "Trip-A" or "Trip-B" is displayed, push the "RESET" button for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically and the display will return to the prior mode after refueling and traveling 5 km (3 mi). TIP The display cannot be changed back to "F Trip" after pushing the "RESET" button. This indicator flashes at the initial 1000 km (600 mi), then at 5000 km (3125 mi) and every 5000 km (3125 mi) thereafter to indicate that the engine oil should be changed. After changing the engine oil, reset the oil change indicator. To reset the oil change indicator, select it by pushing the "SELECT" button until "OIL Trip" is displayed, and then push the "RESET" button at least 1 second. When pushing the "RESET" button, "OIL Trip" starts flashing. While "OIL Trip" is flashing, push the "RESET" button for at least 3 seconds. If the engine oil is changed before the 4-6