2009 Yamaha Motorsports TMAX Owners Manual - Page 60

2009 Yamaha Motorsports TMAX Manual

Get 2009 Yamaha Motorsports TMAX PDF manuals and user guides View all 2009 Yamaha Motorsports TMAX manuals

Page 60 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT 2 1 1 2 3 4 5 6 7 8 9 1. Oil filter wrench 2. Oil filter cartridge 1. Torque wrench 1 Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replacement: 2.80 L (2.96 US qt, 2.46 Imp.qt) With oil filter cartridge replacement: 2.90 L (3.07 US qt, 2.55 Imp.qt) TIP An oil filter wrench is available at a Yamaha dealer. 7. Apply a thin coat of clean engine oil to the O-ring of the new oil filter cartridge. TIP Make sure that the O-ring is properly seated. 8. Install the new oil filter cartridge, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12.3 ft·lbf) TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECA11620 9. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31.1 ft·lbf) 10. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. NOTICE G In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. G Make sure that no foreign material enters the crankcase. 7-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-14
1
2
3
4
5
6
7
8
9
TIP
An oil filter wrench is available at a
Yamaha dealer.
7. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
TIP
Make sure that the O-ring is properly
seated.
8. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
9. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
10. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
NOTICE
ECA11620
±
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of
“
CD
”
or oils of a high-
er quality than specified. In
addition, do not use oils labeled
“
ENERGY CONSERVING II
”
or
higher.
±
Make sure that no foreign mate-
rial enters the crankcase.
1. Oil
fi
lter wrench
2. Oil
fi
lter cartridge
2
1
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m
·
kgf, 12.3 ft
·
lbf)
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m
·
kgf, 31.1 ft
·
lbf)
1
Recommended engine oil:
See page 9-1.
Oil quantity:
Without oil filter cartridge replace-
ment:
2.80 L (2.96 US qt, 2.46 Imp.qt)
With oil filter cartridge replacement:
2.90 L (3.07 US qt, 2.55 Imp.qt)