2009 Yamaha Motorsports Phazer M-TX Owners Manual - Page 38
2009 Yamaha Motorsports Phazer M-TX Manual
Page 38 highlights
Control functions 1. Compression damping force adjusting screw Compression damping force setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 1 click(s) in direction (b)* * With the adjusting screw fully turned in direction (a) ESU11033 Adjusting the control rods (PZ50VT) EWS00770 1. Locknut 2. Control rod adjusting nut WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. The weight transfer can be adjusted by turning the adjusting nuts on the control rods. 1. Loosen the locknut while holding the adjusting nut. 2. To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum setting, indicated by red paint; otherwise, they could be damaged, which could lead to an accident or injury. [EWS00173] 32