2008 Yamaha Motorsports RS Vector L-TX Owners Manual - Page 70
2008 Yamaha Motorsports RS Vector L-TX Manual
Page 70 highlights
Periodic maintenance ESU12270 Adjusting the headlight beams 1. 2. Remove the top cover. (See page 40 for removal procedures.) Use a Phillips screwdriver to turn the headlight beam adjusting screw and adjust the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the headlight beam adjusting screw in direction (b). 1. Bulb holder 6. 7. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. Bulb type: Halogen bulb ECS00620 CAUTION: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. 1. Headlight beam adjusting screw 3. Install the top cover. ESU12290 Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. ESU12300 Battery This snowmobile is equipped with a sealedtype (MF) battery, which does not require any maintenance. There is no need to check the electrolyte or to add distilled water. 1. Do not touch the glass part of the bulb. To charge the battery Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the snowmobile is equipped with electrical accessories. 8. 9. Install the bulb holder cover, and then connect the headlight coupler. Install the headlight access panel and the top cover. 64