2008 Yamaha Motorsports RS Vector L-TX Owners Manual - Page 49

2008 Yamaha Motorsports RS Vector L-TX Manual

Get 2008 Yamaha Motorsports RS Vector L-TX PDF manuals and user guides View all 2008 Yamaha Motorsports RS Vector L-TX manuals

Page 49 highlights

Periodic maintenance Spark plug gap: 0.7-0.8 mm (0.028-0.031 in) When installing the spark plug, always clean the gasket surface. Wipe off any grime from the threads and tighten the spark plug to the specified torque. Spark plug tightening torque: 12.5 Nm (1.25 m·kgf, 9 ft·lb) ECS00380 1. Throttle stop screw CAUTION: Make sure that the spark plug caps are securely installed. Otherwise the spark plug caps could be damaged due to engine vibration. ESU12900 Standard engine idling speed: 1300-1500 r/min 4. Install the shroud. ESU12910 Adjusting the engine idling speed ECS00390 Adjusting the throttle cable free play ECS00410 CAUTION: Be sure to adjust the engine idling speed first. 1. Remove the shroud and the right side cover. (See page 40 for removal procedures.) Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. CAUTION: G G G Be sure to have a Yamaha dealer make this adjustment. Make sure that the throttle lever moves smoothly. Make sure that the carburetor is synchronized first. Remove the shroud. (See page 40 for removal procedures.) Start the engine and warm it up. Turn the throttle stop screw in or out to adjust the engine idling speed. 2. 3. 1. 2. 3. 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Periodic maintenance
43
When installing the spark plug, always clean
the gasket surface. Wipe off any grime from
the threads and tighten the spark plug to the
specified torque.
CAUTION:
ECS00380
Make sure that the spark plug caps are se-
curely installed. Otherwise the spark plug
caps could be damaged due to engine vi-
bration.
ESU12900
Adjusting the engine idling
speed
CAUTION:
ECS00390
●
Be sure to have a Yamaha dealer make
this adjustment.
●
Make sure that the throttle lever moves
smoothly.
●
Make sure that the carburetor is syn-
chronized first.
1.
Remove the shroud. (See page 40 for re-
moval procedures.)
2.
Start the engine and warm it up.
3.
Turn the throttle stop screw in or out to
adjust the engine idling speed.
4.
Install the shroud.
ESU12910
Adjusting the throttle cable free
play
CAUTION:
ECS00410
Be sure to adjust the engine idling speed
first.
1.
Remove the shroud and the right side
cover. (See page 40 for removal proce-
dures.)
2.
Loosen the locknut.
3.
Turn the adjusting bolt in or out until the
specified throttle cable free play is ob-
tained.
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
Spark plug tightening torque:
12.5 Nm (1.25 m·kgf, 9 ft·lb)
1.
Throttle stop screw
Standard engine idling speed:
1300–1500 r/min
1. Locknut
2.
Throttle cable free play adjusting bolt
3.
Throttle cable free play