2008 Yamaha Motorsports Morphous Owners Manual - Page 64

2008 Yamaha Motorsports Morphous Manual

Page 64 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 1 1 2 1 2 ment installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. To clean the air filter check hoses 1. Remove cowling D. (See page 6-8.) 2. Check the hoses at the bottom of the air filter case for accumulated dirt or water. 1 2 3 4 5 6 7 8 9 1. Screw 2. Air filter case cover 1. Bolt 2. Storage compartment B 1. Screw 2. Air filter element 4. Remove the air filter case cover by removing the screws. 1 6. Insert a new air filter element into the air filter case, and then install the screw. 7. Install the air filter case cover by installing the screws. 8. Place the storage compartment in its original position, and then install the bolts. 9. Close the seat. ECA10480 1 1. Air filter check hose 2 5. Remove the screw, and then pull the air filter element out. CAUTION: G Make sure that the air filter element is properly seated in the air filter case. G The engine should never be operated without the air filter ele6-22 3. If dirt or water is visible, remove the hose, clean it, and then install it. 4. Install the cowling.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

PERIODIC MAINTENANCE AND MINOR REPAIR
6-22
1
2
3
4
5
6
7
8
9
4. Remove the air filter case cover by
removing the screws.
5. Remove the screw, and then pull
the air filter element out.
6. Insert a new air filter element into
the air filter case, and then install
the screw.
7.
Install the air filter case cover by in-
stalling the screws.
8. Place the storage compartment in
its original position, and then install
the bolts.
9. Close the seat.
CAUTION:
ECA10480
±
Make sure that the air filter ele-
ment is properly seated in the
air filter case.
±
The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
To clean the air filter check hoses
1. Remove
cowling
D.
(See
page 6-8.)
2. Check the hoses at the bottom of
the air filter case for accumulated
dirt or water.
3. If dirt or water is visible, remove
the hose, clean it, and then install
it.
4. Install the cowling.
1. Bolt
2. Storage compartment B
1. Screw
2. Air
lter case cover
1
1
2
1
2
1. Screw
2. Air
lter element
1
2
1. Air
lter check hose
1