2008 Yamaha Motorsports Morphous Owners Manual - Page 59

2008 Yamaha Motorsports Morphous Manual

Page 59 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 4. Check the washer for damage and replace it if necessary. 1 1 2 3 4 2 1 2 2 3 1. Bolt 2. Oil filter element cover 1. Engine oil drain bolt 2. Washer 1. Oil filter element cover 2. O-ring 3. Compression spring 4. Oil filter element ECA12910 4 5 6 7 8 9 6. Remove and replace the oil filter element and O-rings. NOTE: Skip steps 5-7 if the oil filter element is not being replaced. 5. Remove the oil filter element cover by removing the bolts. CAUTION: When removing the oil filter element cover, the compression spring will fall out. Take care not to lose the compression spring. 7. Install the compression spring and oil filter element cover by installing the bolts, then tightening them to the specified torque. 6-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

PERIODIC MAINTENANCE AND MINOR REPAIR
6-17
2
3
4
5
6
7
8
9
4. Check the washer for damage and
replace it if necessary.
NOTE:
Skip steps 5
7 if the oil filter element is
not being replaced.
5. Remove the oil filter element cover
by removing the bolts.
6. Remove and replace the oil filter
element and O-rings.
CAUTION:
ECA12910
When removing the oil filter element
cover, the compression spring will
fall out. Take care not to lose the
compression spring.
7. Install the compression spring and
oil filter element cover by installing
the bolts, then tightening them to
the specified torque.
1. Engine oil drain bolt
2. Washer
2
1
1. Bolt
2. Oil
lter element cover
2
1
1. Oil
lter element cover
2. O-ring
3. Compression spring
4. Oil
lter element
1
2
3
4