2007 Yamaha Motorsports Phazer Owners Manual - Page 66

2007 Yamaha Motorsports Phazer Manual

Get 2007 Yamaha Motorsports Phazer PDF manuals and user guides View all 2007 Yamaha Motorsports Phazer manuals

Page 66 highlights

4. Remove the dipstick and check that the oil reaches the bottom of the dipstick. If the oil does not reach the bottom of the dipstick, add sufficient oil to raise it to the correct level. Drive chain oil: GL-3 75 W or 80 W CAUTION: @ Make sure that no foreign material enters the drive chain housing. @ 5. Install the dipstick, making sure to align the notch 2 in the dipstick handle with the projection 3 on the drive chain housing. 6. Install the right side cover. Adjusting the chain tension 1. Remove the right side cover. (See pages 8-5-8-8 for removal procedures.) 2. Loosen the locknut. 3. Turn the adjusting bolt clockwise until it is finger tight, and then loosen it 1/4 turn. 4. Hold the adjusting bolt in place while tightening the locknut. 1 Locknut 2 Adjusting bolt 5. Install the right side cover. ESU00174 Checking the brake pads Check the brake pads for wear. If the brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1 Brake pad wear indicator Wear limit a: 1.5 mm (0.06 in) 8-18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
8-18
4. Remove the dipstick and check that the oil reaches
the bottom of the dipstick. If the oil does not reach the
bottom of the dipstick, add sufficient oil to raise it to
the correct level.
CAUTION
:
@
Make sure that no foreign material enters the drive
chain housing.
@
5. Install the dipstick, making sure to align the notch
2
in the dipstick handle with the projection
3
on the
drive chain housing.
6. Install the right side cover.
Adjusting the chain tension
1. Remove the right side cover. (See pages 8-5–8-8 for
removal procedures.)
2. Loosen the locknut.
3. Turn the adjusting bolt clockwise until it is finger tight,
and then loosen it 1/4 turn.
4. Hold the adjusting bolt in place while tightening the
locknut.
1
Locknut
2
Adjusting bolt
5. Install the right side cover.
ESU00174
Checking the brake pads
Check the brake pads for wear.
If the brake pads reach the wear limit, ask a Yamaha
dealer to replace them.
1
Brake pad wear indicator
Drive chain oil:
GL-3
75 W or 80 W
Wear limit
a
: 1.5 mm (0.06 in)