2007 Yamaha Motorsports Phazer Owners Manual - Page 39

2007 Yamaha Motorsports Phazer Manual

Page 39 highlights

ESU05260 Air filter Always check that there is no snow under the air filter element. 1. Remove the front cover and the air filter case cover. (See pages 8-5-8-8 for removal procedures.) 2. Unhook the air filter element frame fasteners. 3. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element and brush off the snow, and then install the air filter element. 4. Place the air filter element frame in its original position, and then hook the fasteners onto the frame. 5. Install the air filter case cover and the front cover. NOTE: @ After riding the snowmobile, make sure that there is no snow under the air filter element. @ ESU00110 Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. ESU00345 Tool kit and recommended equipment It is good practice to carry the tool kit, spare parts, and other necessary equipment with you while riding the snowmobile so that minor repairs can be done if necessary. The following should be carried at all times: G G G G G G G G G Tool kit Flashlight Roll of plastic tape Steel wire Towrope Jumper cables V-belt Light bulbs Spark plugs When you start out for a long distance trip, extra fuel and oil should be carried as well. 6-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

6-10
ESU05260
Air filter
Always check that there is no snow under the air filter
element.
1. Remove the front cover and the air filter case cover.
(See pages 8-5–8-8 for removal procedures.)
2. Unhook the air filter element frame fasteners.
3. Lift up the air filter element frame and check the air
filter element. If there is any snow on the air filter ele-
ment, remove the element and brush off the snow,
and then install the air filter element.
4. Place the air filter element frame in its original posi-
tion, and then hook the fasteners onto the frame.
5. Install the air filter case cover and the front cover.
NOTE:
@
After riding the snowmobile, make sure that there is no
snow under the air filter element.
@
ESU00110
Fittings and fasteners
Check the tightness of the fittings and fasteners.
Tighten in proper sequence and torque if necessary.
ESU00345
Tool kit and recommended equipment
It is good practice to carry the tool kit, spare parts, and
other necessary equipment with you while riding the
snowmobile so that minor repairs can be done if neces-
sary. The following should be carried at all times:
Tool kit
Flashlight
Roll of plastic tape
Steel wire
Towrope
Jumper cables
V-belt
Light bulbs
Spark plugs
When you start out for a long distance trip, extra fuel and
oil should be carried as well.