2007 Yamaha Motorsports Phazer Owners Manual - Page 64
2007 Yamaha Motorsports Phazer Manual
Page 64 highlights
ESU05280 Replacing the V-belt WARNING @ Have a Yamaha dealer replace the V-belt and adjust the gap between the secondary fixed sheave and the secondary sliding sheave. Serious injury can occur from the sudden release of spring tension during sheave disassembly. @ CAUTION: @ To ensure proper clutch performance as the V-belt wears, it is necessary to adjust the gap between the secondary fixed sheave and secondary sliding sheave by changing the positions of the spacers. Have a Yamaha dealer make this adjustment. @ CD-05E New belt width Belt wear limit width 34.1 mm (1.34 in) 32.5 mm (1.28 in) NOTE: @ Apply the parking brake before replacing the V-belt. @ 1. Remove the left side cover. (See pages 8-5-8-8 for removal procedure.) 2. Remove the drive guard. 3. Rotate the secondary sliding sheave clockwise 1 and push 2 it so that it separates from the secondary fixed sheave. 4. Pull 3 the V-belt up over the secondary fixed sheave. 5. Remove the V-belt from the secondary sheave assembly and primary sheave assembly. 6. Install the new V-belt over the primary sheave assembly. 8-16