2007 Yamaha Motorsports Phazer Owners Manual - Page 55
2007 Yamaha Motorsports Phazer Manual
Page 55 highlights
Top cover To remove the top cover Pull up on the rear of the top cover. 1 Top cover To install the top cover Insert the projections on the front of the top cover into the slots in the left and right upper covers, and then fit the projections on the rear of the top cover into the grommets. Right upper cover To remove the right upper cover 1. Remove the top cover. (See the above procedure.) 2. Remove the right upper cover by removing the bolts. 1 Right upper cover bolt 2 Right upper cover To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten the bolts to the specified torque. Right upper cover bolt tightening torque: 8 Nm (0.8 m·kgf, 6 ft·lb) 2. Install the top cover. WARNING @ G G G @ Do not drive the snowmobile with the covers unfastened or removed. Keep your body and clothing away from rotating parts when servicing the snowmobile with the covers removed. Do not touch the hot muffler and engine during or immediately after operation. 8-7