2007 Yamaha Motorsports Phazer FX Owners Manual - Page 63
2007 Yamaha Motorsports Phazer FX Manual
Page 63 highlights
Right upper cover (for PZ50FX/PZ50GT/PZ50M) To remove the right upper cover 1. Remove the top cover. (See the above procedure.) 2. Remove the right upper cover by removing the bolts. 1 Right upper cover bolt 2 Right upper cover To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten the bolts to the specified torque. Right upper cover bolt tightening torque: 8 Nm (0.8 m·kgf, 6 ft·lb) 2. Install the top cover. Left and right upper covers (for PZ50VT) To remove an upper cover 1. Open the shroud. (See the above procedure.) 2. Loosen the quick fasteners, and then remove the upper cover. 1 Quick fastener 2 Left upper cover 3 Right upper cover To install an upper cover Insert the projections on the upper cover into the slots and fit the holders on the cover onto the grommets, and then tighten the quick fasteners. 4 5 6 7 Projection Holder Grommet Slot WARNING @ G G G @ Do not drive the snowmobile with the shroud or covers unfastened or removed. Keep your body and clothing away from rotating parts when servicing the snowmobile with the shroud open or the covers removed. Do not touch the hot muffler and engine during or immediately after operation. 8-8