2007 Yamaha Motorsports Phazer FX Owners Manual - Page 44

2007 Yamaha Motorsports Phazer FX Manual

Get 2007 Yamaha Motorsports Phazer FX PDF manuals and user guides View all 2007 Yamaha Motorsports Phazer FX manuals

Page 44 highlights

ESU00103 Steering system Check the handlebar for excessive free play: 1. Push the handlebar up and down and back and forth. 2. Turn the handlebar slightly to the right and left. If excessive free play is noticed, consult a Yamaha dealer. ESU01050 Lights Check the lights. Replace any burned out bulbs. CAUTION: @ Avoid using a scraper or hot water for cleaning the plastics lens 1. @ ESU05510 Air filter Always check that there is no snow under the air filter element. 1. Remove the front cover (for PZ50FX/PZ50GT/ PZ50M) or open the shroud (for PZ50VT), and then remove the air filter case cover. (See pages 8-6-8-9 for removal procedures.) 2. Unhook the air filter element frame fasteners. 3. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element and brush off the snow, and then install the air filter element. 4. Place the air filter element frame in its original position, and then hook the fasteners onto the frame. 5. Install the air filter case cover, and then install the front cover (for PZ50FX/PZ50GT/PZ50M) or close the shroud (for PZ50VT). NOTE: @ After riding the snowmobile, make sure that there is no snow under the air filter element. @ ESU00110 Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. 6-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
6-10
ESU00103
Steering system
Check the handlebar for excessive free play:
1. Push the handlebar up and down and back and forth.
2. Turn the handlebar slightly to the right and left.
If excessive free play is noticed, consult a Yamaha
dealer.
ESU01050
Lights
Check the lights.
Replace any burned out bulbs.
CAUTION
:
@
Avoid using a scraper or hot water for cleaning the
plastics lens
1
.
@
ESU05510
Air filter
Always check that there is no snow under the air filter
element.
1. Remove the front cover (for PZ50FX/PZ50GT/
PZ50M) or open the shroud (for PZ50VT), and then
remove the air filter case cover. (See pages 8-6–8-9
for removal procedures.)
2. Unhook the air filter element frame fasteners.
3. Lift up the air filter element frame and check the air
filter element. If there is any snow on the air filter ele-
ment, remove the element and brush off the snow,
and then install the air filter element.
4. Place the air filter element frame in its original posi-
tion, and then hook the fasteners onto the frame.
5. Install the air filter case cover, and then install the
front cover (for PZ50FX/PZ50GT/PZ50M) or close
the shroud (for PZ50VT).
NOTE:
@
After riding the snowmobile, make sure that there is no
snow under the air filter element.
@
ESU00110
Fittings and fasteners
Check the tightness of the fittings and fasteners.
Tighten in proper sequence and torque if necessary.