2006 Yamaha Motorsports Apex GT Owners Manual - Page 83
2006 Yamaha Motorsports Apex GT Manual
Page 83 highlights
ESU04045 Adjusting the rear suspension spring preload The rear suspension spring preload can be adjusted by turning the spring preload adjuster 1 on the shock absorber (RX10GT) or each shock absorber (RX10M). A For RX10GT CD-35E Spring seat length* Preload È a Length Standard Increased Harder Decreased → Softer Maximum Minimum 141.5 mm 131.5 mm 120.5 mm (5.57 in) (5.18 in) (4.74 in) ∗ The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjuster. B For RX10M CD-13E Spring adjuster position Preload É Standard (front) 1 Soft 2 3 3 4 5 Hard C CD-23E Spring adjuster position Preload Ê Standard (rear) S Soft M Medium M H Hard WARNING @ Be sure to have a Yamaha dealer make this adjustment. This shock absorber contains highly pressurized nitrogen gas. It could explode by improper handling, causing injury or property damage. G Do not tamper with or attempt to open the shock absorber. G Do not subject the shock absorber to an open flame or other high heat sources, which could cause it to explode. 8-25