2011 Volvo S40 Owner's Manual - Page 199
2011 Volvo S40 Manual
Page 199 highlights
07 Wheels and tires Changing a wheel Installing the wheel 1. Clean the contact surfaces between the wheel and hub. 2. Lift the wheel and place it on the hub. 3. Install the wheel nuts and hand-tighten them. Using the lug wrench, tighten crosswise until all nuts are snug. 4. Lower the vehicle to the ground and alternately tighten the bolts crosswise to 81 ft. lbs. (110 Nm) or 96 ft. lbs. (130 Nm), depending on the type of wheel/wheel nuts used on your vehicle. See also 191 for additional information. 5. Install the wheel cover (where applicable). See page 192 for information on returning the jack and tools to their proper storage positions. On vehicles equipped with the tire sealing system, the jack should be cranked down as far as possible and returned to its storage position in the foam block. WARNING The jack and any tools should always be returned to their proper storage compartments after use to help keep them securely in place in the event of sudden braking, etc. 07 199