2011 Volvo S40 Owner's Manual - Page 116

04 Interior Rear seat CAUTION 3. Fold the backrest down partially and remove the outboard head restraints. Press the center head restraint down completely or remove it. 4. Place the head restraints in the plastic tubes, which are now accessible on the under side of the seat cushions. • When the backrests are folded down, the head restraints may be damaged if they are not removed. The center head restraint must also be removed when transporting heavy loads. To help prevent damage to the upholstery when a backrest is folded down, be sure that there are no objects on the seat and that the seat belt is not buckled. When folding down the rear seat backrests, remove the plug in the rear 12-volt socket to help avoid marks in the upholstery. • WARNING The center rear seat head restraint should only be in its lowest position when this seat is NOT occupied. When the center position is occupied, the head restraint should be correctly adjusted to the passenger's height. The upper edge of the head restraint should be at least on a level with the uppermost point of the seat occupant's ear. 04 • Rear edge of seat cushion Catch Folding down the backrest Location of the head restraint in the seat cushion To fold down one or both sections: 1. Grasp the rear edge of the seat cushion and pull it forward. 2. Pull the catch on the upper outboard edge of the backrest upward and forward to release the backrest lock. A red lock indicator is visible when the backrest is not locked in the upright position. 116