2016 Polaris Ranger Crew 900 Owners Manual - Page 83
2016 Polaris Ranger Crew 900 Manual
Page 83 highlights
MAINTENANCE POLARIS Variable Transmission (PVT) System PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Position the vehicle on a level surface. Place the transmission in PARK. Stop the engine. 2. Remove the clutch cover drain plug. Allow the water to drain completely. Reinstall the drain plug. 3. Start the engine. 4. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. Do not apply heavy throttle for more than 10 seconds. 5. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the transmission to the lowest available range. Drain Plug 6. Test for belt slippage. If the belt slips, repeat the process. 7. Your vehicle requires service as soon as possible. Your POLARIS dealer can assist. Vehicle Immersion NOTICE: If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before starting the engine. Your POLARIS dealer can provide this service. If it's impossible to take your RANGER to a dealer before starting it, follow the steps outlined below. 1. Move the vehicle to dry land or at the very least, to water below the floorboard. 2. Dry any water present in the air box. Filter replacement is required if water is present. 3. Dry any water present in the intake manifold. 4. Remove the spark plugs. Turn the engine over several times using the electric start. 5. Dry the spark plugs and reinstall, or replace with new plugs. 6. Attempt to start the engine. If necessary, repeat the drying procedure. 7. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your POLARIS dealer can provide the required service. 8. If water has been ingested into the PVT, follow the PVT Drying procedure. 81