2016 Polaris Ranger Crew 900 Owners Manual - Page 76

2016 Polaris Ranger Crew 900 Manual

Get 2016 Polaris Ranger Crew 900 PDF manuals and user guides View all 2016 Polaris Ranger Crew 900 manuals

Page 76 highlights

MAINTENANCE Gearcases Front Gearcase Always check and change the front gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 67. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart on page 73 for recommended lubricants, capacities and torque specifications. See page 102 for the part numbers of POLARIS products. ADC Models: Change the front gearcase fluid every 25 hours if the ADC unit is exposed to extreme use. Extreme use includes any of the following: • operation in ADC mode for prolonged periods • constant ADC operation on hilly or mountainous terrain • ADC is the primary mode of all-wheel-drive operation Tip: If the front gearcase makes excessive noise during ADC operation, change the demand drive fluid. If the noise continues, please see your POLARIS dealer or other qualified service person for service. Oil Check The front gearcase fill plug is located on the right side of the front gearcase. 1. Position the vehicle on a level surface. 2. Place the transmission in PARK. 3. Remove the fill plug. Check the oil level. 4. Add the recommended oil as needed. 5. Reinstall the fill plug. Torque to specification. Oil Change 1. Support the vehicle securely with a jackstand. 2. Remove the fill plug. 3. Place a drain pan under the drain plug. 4. Remove the drain plug. Allow the oil to drain completely. 5. Clean and reinstall the drain plug. Torque to specification. 6. Add the recommended oil. 7. Reinstall the fill plug. Torque to specification. 8. Check for leaks. Dispose of used oil properly. Fill Plug Fill Level Recessed Drain Plug 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
74
MAINTENANCE
Gearcases
Front Gearcase
Always check and change the front gearcase oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 67. Maintain the oil level even with the bottom thread
of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 73 for recommended lubricants,
capacities and torque specifications. See page 102 for the part numbers of POLARIS
products.
ADC Models:
Change the front gearcase fluid every 25 hours if the ADC unit is exposed to
extreme use. Extreme use includes any of the following:
°
operation in ADC mode for prolonged periods
°
constant ADC operation on hilly or mountainous terrain
°
ADC is the primary mode of all-wheel-drive operation
Tip:
If the front gearcase makes excessive noise during ADC operation, change the demand drive fluid.
If the noise continues, please see your POLARIS dealer or other qualified service person for
service.
Oil Check
The front gearcase fill plug is located on the right
side of the front gearcase.
1.
Position the vehicle on a level surface.
2.
Place the transmission in PARK.
3.
Remove the fill plug. Check the oil level.
4.
Add the recommended oil as needed.
5.
Reinstall the fill plug. Torque to specification.
Oil Change
1.
Support the vehicle securely with a jackstand.
2.
Remove the fill plug.
3.
Place a drain pan under the drain plug.
4.
Remove the drain plug. Allow the oil to drain
completely.
5.
Clean and reinstall the drain plug. Torque to
specification.
6.
Add the recommended oil.
7.
Reinstall the fill plug. Torque to specification.
8.
Check for leaks. Dispose of used oil properly.
Recessed
Drain Plug
Fill
Plug
Fill
Level