2015 Polaris Slingshot SL Owners Manual - Page 78

MAINTENANCE Headlamp Aim Adjustment (Canada) 1. Verify that headlamp aim inspection conditions are met. See page 74. 2. Position the vehicle on a level surface with the nose approximately 25 ft. (7.6 m) from a wall. 3. Move the ignition switch to the ON position to turn the lights on. Place the headlamps on low beam. 4. Observe the headlight beam display on the wall. The beam displays at two levels, higher at the right side and lower at the left side. 5. Measure from the floor to the lower beam display at the left side as illustrated. When the beam is properly adjusted, this measurement should be in the following range: • 20-21.75" (51-55 cm) for base model • 21-22.75" (53.3-57.8 cm) for SL model 25 ft. (7.6 m) SLINGSHOT Acceptable Range 21.75" (55 cm) 20" (51cm) Measure Left Lower Beam SLINGSHOT SL Acceptable Range 22.75" (57.8 cm) 21" (53.3 cm) Measure Left Lower Beam 6. To adjust a headlight beam, open the hood and turn the two upper headlamp screws simultaneously and equally. • Clockwise adjustment raises the beam • Counter-clockwise adjustment lowers the beam Adjust Simultaneously and Equally Clockwise (Raise the Beam) Counter-Clockwise (Lower the Beam) 76