2015 Polaris Slingshot SL Owners Manual - Page 40

PRE-RIDE INSPECTIONS Fuel Level 1. Position the vehicle on a level surface. 2. Turn the ignition switch to the ON position. 3. Observe the fuel level in the fuel gauge. See page 24. 4. Refuel as needed. See page 41 for fuel specifications. Fuel Level Steering 1. Position the vehicle on a level surface. 2. Turn the steering wheel full left, then full right. The action should be smooth, but not loose. Front Suspension Inspect the front suspension for oil leaks or damage. Verify smooth suspension operation. Rear Suspension 1. Check rear shock absorber movement to ensure the correct amount of suspension travel and ground clearance. Refer to the specifications section beginning on page 84. WARNING! Inadequate ground clearance could result in components contacting the ground, causing loss of control and serious injury or death. Always ensure ground clearance is at specification. Drive Belt 1. Check the drive belt teeth for stones or other debris. 2. Inspect drive belt condition. If you discover cracks, broken teeth or frayed edges, replace the drive belt before riding. See the SLINGSHOT Service Manual or an authorized dealer. Drive Belt Fasteners 1. Inspect the entire vehicle chassis and engine for loose, damaged or missing fasteners. Tighten loose fasteners to the proper torque. NOTE: Refer to the specifications section of this manual or the service manual for fastener torque values, or see your dealer. 2. Always replace stripped, damaged or broken fasteners before riding. Use genuine SLINGSHOT fasteners of equal size and strength. 38