2015 Polaris Slingshot SL Owners Manual - Page 57
2015 Polaris Slingshot SL Manual
Page 57 highlights
MAINTENANCE Angle Drive Fluid This fluid level does not require routine inspection. If you suspect a fluid leak, inspect the fluid level. Always change the angle drive fluid at the intervals outlined in the Periodic Maintenance Chart beginning on page 51. Always use SLINGSHOT Angle Drive Fluid or another SAE 80W-90 fluid for the angle drive. See page 86 for the part numbers of recommended service products. The fill plug is located on the left side of the angle drive housing. The drain plug is located on the right side of the housing. Fluid Level Check 1. Elevate the vehicle using appropriate jack stands. Make sure the elevated vehicle is level. 2. Remove the fill plug. If the fluid level is not at the bottom edge of the fill hole, add the recommended fluid to bring the level to the bottom edge of the fill hole. NOTE: Use a syringe to add the fluid. If a syringe is not available, remove the battery and use a funnel and tube to add the fluid. Fill Plug 3. Reinstall the fill plug. Torque: 10-14 ft-lbs (14-19 Nm) 4. See your dealer for service. A low fluid level indicates a fluid leak. Fluid Change 1. Elevate the vehicle using appropriate jack Fill Plug Drain Plug stands. Make sure the elevated vehicle is level. 2. Remove the fill plug. 3. Place a drain pan under the drain plug. 4. Remove the drain plug. Allow the fluid to drain completely. 5. Clean and reinstall the drain plug. Torque to specification. Torque: 10-14 ft-lbs (14-19 Nm) NOTE: Use a syringe to add the fluid. If a syringe is not available, remove the battery and use a funnel and tube to add the fluid. 6. Add the recommended fluid. Do not overfill. Maintain the fluid level at the bottom edge of the fill hole. Capacity: 23.7 oz (700 ml) 7. Reinstall the fill plug. Torque to specification. Torque: 10-14 ft-lbs (14-19 Nm) 8. Check for leaks. Dispose of used fluid properly. 55