2014 Polaris 800 Pro RMK Owners Manual - Page 98
2014 Polaris 800 Pro RMK Manual
Page 98 highlights
MAINTENANCE Brakes Hydraulic Brake Inspection Inspect the brake lever reserve before each use of the snowmobile. See page 59. Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16 inch or 1.5 mm). A kit is available for replacing brake pads. See your dealer. WARNING! Brake failure during operation can result in serious injury or death. Properly functioning brakes are vital to your safety. Be sure the brake pads do not drag on the disc and that brake lever travel is not excessive. Always replace brake pads when the brake pad material becomes thinner than the backing plate (approximately 1/16 inch or 1.5 mm). Brake Components 1. Brake Caliper 2. Brake Disc 3. Brake Pad Material (Replace when thickness is less than 1/16 inch or 1.5 mm). 4. Anti-rattle springs (come with brake pad kit) 1 4 3 Excessive Lever Travel Hydraulic brakes are selfadjusting, but if excessive brake pad clearance develops, bring the snowmobile to an authorized POLARIS dealer for inspection and adjustment. 2 TIP: The PRO RMK and RMK ASSAULT models are equipped with a lightweight brake disc that has vent holes. These holes may cause a high-pitched sound during operation. 96