2014 Polaris 800 Pro RMK Owners Manual - Page 57
2014 Polaris 800 Pro RMK Manual
Page 57 highlights
THE PERFECT FIT Handlebar Adjustments Loosen top bolts to adjust handlebar angle Loosen bottom bolts to adjust handlebar position (if equipped) Handlebar Position (if equipped) 1. Loosen the four bolts on the bottom of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired position. 3. Tighten the bolts. Handlebar Angle 1. Loosen the four bolts on the top of the adjuster block. If necessary, pry the blocks apart with a screwdriver. 2. Adjust the handlebar forward or rearward to the desired angle. Be sure handlebars, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, loosen the set screws for the left and right controls, rotate the controls slightly, then tighten the set screws to the proper torque. NOTICE: Do not stretch wires while adjusting the controls. Stretching the wires could damage the handwarmers. • Right control torque: 27 in. lbs. (3.05 Nm) +/- 10%. • Left control torque (RMK): 24 in. lbs. (2.7 Nm) +/- 10%. • Left control torque (PRO RMK): 70 in. lbs. (8 Nm) +/- 10 in. lbs. 3. Tighten the bolts. 55